User`s manual

xv
Basic Safety
Instructions
Please read this entire Manual before
attempting to Print.
Follow all warnings on and about the printer.•
Use the proper power source type indicated on the printer’s label and in •
this manual.
Connect all equipment to grounded outlets. Use the included surge
•
protector power strip included with each machine. Do NOT plug other
items into this surge protector.
Place the printer where the power outlet is easily seen.
•
Do not allow the power cord to be damaged.•
If you are using an extension cord, ensure the extension cord’s power •
ampere rate does not exceed that of the printer’s cord.
Keep electromagnetic devices and other potential sources of magnetic
•
elds away from your printer.
Do not use the printer in locations that have high humidity (40 - 60%
•
humidity recommended), shocks, vibrations, debris or dust.
Leave enough space around the printer for proper ventilation.
•
Do not leave the printer near heat sources such as radiators or heat vents.•
Do not leave the printer in direct sunlight.•
Place the printer on a stable surface that extends beyond the length •
and width of the printer supports. The printer will not work properly if it
is tilted or leaning.
When packing and moving the printer, do not set the Blazer PRO on its
•
side or
upside down. This may cause the ink to spill. The Blazer EXPRESS can
be tilted to t through small doorways when crated (see page 7).
Turn the printer OFF before cleaning the exterior. Clean with a damp
•
cloth and avoid
spilling any liquid on the printer. We recommend using brushed aluminum
wipes and stainless steel cleaner