User`s manual

Chapter 13 - Daily, Weekly and Monthly Maintenance
123
3. Clean the Wiper Blade
The Wiper Blade is a part of the capping station (above the
capping station) that wipes off left over residue after printing
large volumes of jobs. The wiper blade is an important
component and needs to be kept clean in order to reduce
other maintenance issues.
Using a foam tipped swab along with FastINK HD Cleaning
Fluid, clean both sides of the wiper blade, making sure that
there is no residue present.
NOTE: Move the clear plastic cover out of the way for access
4. Check and Clean the Spit Tray
The Spit Tray/Flushing Box assembly sits to the left of the
capping station and wiper. The Spit Tray collects waste
ink from Head Cleaning Cycles (etc.) very quickly. Check
it regularly and clean if needed.
5. Clean the Print Head Area
After printing several jobs, ink and lint will accumulate
around the Print Head area. Using a foam tipped swab along
with FastINK HD Cleaning Fluid, distilled water or glass
cleaner, wipe the surrounding area of the Print Head.
You may need to perform this procedure if anything should
come in contact with the Print Head. Again, always check
the Platen height settings to avoid the print head coming in
contact with anything.
WARNING
Do NOT touch the middle part of the print head where the nozzles are. This could
damage your print head. Only clean around the outside area of where the nozzles
are.