User`s manual

T-Jet Blazer Series User’s Manual
Version 5.0 Revised September, 2008
116
Setting up an Image for Printing
To setup an image for print you may use an application such as Photoshop, Illustrator or CorelDRAW,
however we recommend using FastARTIST. If you will be printing White ink, you MUST use
FastARTIST. For the purposes of this Manual, we demonstrate will setting up the image using
FastARTIST. The steps required for printing with other graphic applications will be very similar- please
consult your application’s Owner’s Manual if needed.
Setup the printing area in which you will be printing on. To do this
1.
you will need a measuring tape to measure the width and height
of the Non-Textile item.
2. From within FastARTIST select File > FastRIP Setup. From the
Setup window, select Page Setup. In the Page Setup window, select
Custom under the Page option. Enter the Height and Width of the
Non-textile item you have measured. After entering the values,
click OK to return to the workspace.
3. Select Layout > Page Size. For the Page Size, enter the Height
and Width of the Non-textile item you have measured. After
entering the values, click OK to return to the workspace.
The non-textile item dimensions will now be represented by a
black box located within the workspace. If this is not displayed,
click View > Show Page Size to view the black box.
Import
4. your image for printing and position the image as you would like it to print on the non-textile
item. For further details, please refer to your FastARTIST User’s Manual.
Select
5. File > Print to FastRIP > Position the image and click on the printer icon located in the Printer
Toolbox. This will send the image to FastRIP.