User`s manual

T-Jet Blazer Series User’s Manual
Version 5.0 Revised September, 2008
108
Washing Directions
For the longest lasting print, the shirt should be turned inside out, washed in COLD water and dried on a
delicate cycle. If possible, include washing directions to customers along with the nished prints.
When you apply the Pretreatment correctly and choose the proper Print Modes, you will get very
detailed bright prints like these!
White Ink Troubleshooting &
Maintenance
For a complete listing of troubleshooting concerns and problems, refer to Chapter 15 -Troubleshooting.
Concern: White prints seem dull
Solution 1:
You may not be applying enough Pretreatment or not using a 1440 DPI print mode.
Solution 2:
The Print Head may be clogged. If you had bright White prints before and they now seem dull, you may
have clogged nozzles. Due to the nature of the White pigment, you may experience more head clogs
than normal. These can easily be cleared by doing two or three Head Cleaning Cycles. Perform a Nozzle
Check to be certain nozzles are ring properly. Always follow Chapter 13 - Daily, Weekly and Monthly
Maintenance. Do not skip a day, week or month.