User`s manual

T-Jet Blazer Series User’s Manual
Version 5.0 Revised September, 2008
88
10. Import your Art into the Template
From the File Pull-down Menu
•
select Import.
Choose the le you want to
•
import.
Click on the page to import the
•
le at it’s actual size or click and
drag to apply a custom size.
You can adjust the size by
clicking and dragging on a
corner.
Center the graphic in the “Safe Area” of the template.
•
Determine the correct print location by using the grid lines which represent an outline of the Shirt
Board(s). The template will open with either a Yellow or Pink placeholder representing the size of
the safe print area. (Click on a block of color to delete it.) NOTE: Do not reposition the guides in
the FastARTIST template. To lock the guides, right click anywhere on the page and a Dialog
Box will appear. Check the “Lock Guides” box and click OK.
HINT: To help determine where and how to place your art in relation to the Shirt Board(s), the top
of the page represents the opposite side of where the printer assembly is.
From the File Pull-down Menu select Save As. Save the le as a different name (name of job)so
•
that you do not save over the Template File.
Think about the printing speed when importing graphics. You can place graphics
sideways in a template and load the shirt sideways if it will accommodate a better
print layout.
Select the appropriate Print Mode.
11.
There are a wide variety of Print Modes available within FastRIP to give you the exibility to print
high resolution photo quality images at a slower speed or lower resolution Spot Color images at faster
speeds.
Blazer Express Standard Template
Blazer PRO Standard (3-up)Template