User`s manual

Non-Textile Printing
Required Items and Overview
You must have the following to successfully print on Non-Textile items:
Non-Textile Pretreatment1.
Non-Textile Post-Treatment2.
(2) Fine Bristle Brushes3.
Optional materials may be required:
Non-Textile Primer1.
A Holder for object(s) (i.e. Golf Ball Holder)2.
Non-Textile Print Modes and Templates (You can utilize the latest Non-Textile 3.
Print Modes by downloading the most recent Printer Package from
www.screenprinters.net)
CAUTION: WEAR GLOVES WHEN APPLYING AND USE WITH
ADEQUATE VENTILATION. HANDLE WITH CARE AND PROTECT
EYES WITH SAFETY GLASSES WHEN APPLYING AS A SPRAY. BEFORE
USE, CONSULT THE MATERIAL DATA SAFETY SHEET (MSDS) THAT IS
INCLUDED WITH THESE PRODUCTS
KEEP OUT OF REACH OF CHILDREN
Getting Started
It is necessary to determine if the surface intended for printing will allow the
Pretreatment to stick. Certain surfaces will accept the direct application of
theNon-TextilePretreatment,whileotherswillrequirerstrequireacoatof
Non-Textile Primer. Generally, smooth surfaces such as light switches, keyboards,
lighters and gloss tiles will require an application of Non-Textile Primer before the
Non-Textile Pretreatment.
To Test: Apply a very small thin amount of Non-Textile Pretreatment to the
intended printing surface. If the Pretreatment runs off, it will be necessary to use
the Non-Textile Primer.
If this is your rst time using a Non-Textile Pretreatment, it is
recommended you pretreat small quantities at rst to familiarize
yourself with the process.
73
Chapter 8- Printing Other Items