User`s manual

Print Modes and FastRIP

When rst starting out, the most versatile Print Mode combination

for BOTH photos and cartoons is 720 DPI for CMYK and 1440 DPI

for the Underbase. For images on light garments in which no

Underbase is used, a 2 Pass Print Mode will result in better color

saturation.

CMYK Cartoon and Photo Print Modes

The Fast T-Jet Blazer Express has three basic modes for printing – Cartoon, Photo,

and Underbase. The Cartoon and Photo Print Modes will print the image in color

when printing from FastARTIST or any other graphics program. These two modes

were created to adjust print characteristics based on the image to be printed. If

you are printing vector graphics with Spot Colors, use the Cartoon Print Modes. If

you are printing photo-type bitmap images, use the Photo Print Modes.

Cartoon Print Modes are designed to:

Lay down more ink with good color saturation•

be used for non-critical images•

allow a lower DPI to be selected•

Photo Print Modes are designed to:

Lay down less ink with highly accurate colors•

reproduce an extremely detailed image•

utilize a higher DPI to ensure good print quality•

Eight Color Print Modes

The Fast T-Jet Blazer Express also supports Eight Color Print Modes that utilize the

additional colors of Red, Green, Blue and Orange in place of the four White

cartridges.Thiscongurationofinkscannotbeusedtoprintondarkgarments,

however when printed on light garments, the additional colors create vibrant

huesthataddanexcitingdimensionalitytoyournaloutput.

The Eight Color Bulk Ink System is an optional conguration. If your

printer is not equipped with the necessary inks and cartridges, you

may purchase the additional accessories from U.S. Screen Print

& Inkjet Technology. Refer to Chapter 7 of your FastARTIST User’s

Manual for details on ink cartridge placement.

Fast T-Jet Blazer Express User’s Manual