User`s manual

You may Open a template and then Import your
graphic into the correct print location using grid
lines that represent an outline of the Shirtboard.
The template will open with either a Yellow or Pink
placeholder representing the size of the graphic.
(Click on a block of color to delete it.)
FastARTIST has a pre-loaded template of 17” x 31”
that keeps the Print Head and Print Bed aligned. If
you are creating images in Photoshop or another
graphics application, make sure you create a
Page Sizethatreectsthesedimensions.Keepin
mind the printable area is limited to 16” x 20”.
When you open the Template, keep in mind printing speed when
importing graphics. You may also place graphics sideways in a
template and load the shirt sideways.
Select the appropriate Print Mode. There are a wide variety of Print Modes 4.
availablewithinFastRIPbecausetheygiveyoutheexibilitytoprinthigh
resolution photo quality images at a slower speed or lower resolution Spot
Color images at faster speeds.
All designs are different and each has different needs. A brief overview of
Print Modes follows. For a detailed listing of available Print Modes and their
recommended usage, please refer to Chapter 7 of your FastARTIST User’s
Manual.
On the UI, use the “hand” arrows to scroll through the screens until you reach 5.
the Mode Select interface. Select the number of passes you wish to make by
pressing the appropriate virtual button.
Send the 6. Print command from your graphics application or FastARTIST.
The 7. Green button on the bottom of the UI will now be blinking. Press both
simultaneously to begin printing your image.
DO NOT press the Green button on the UI prior to sending a job to
Print from your graphics application or FastARTIST. This will result in
serious printer errors and ruined garments.
54
Fast T-Jet Blazer Express User’s Manual