User`s manual

button on the UI. After the printer has completed its shutdown process, Power
ON at the UI and perform a Print Head Alignment.
Print Head Alignment
In addition to the initial setup requirements, it may be necessary to perform a
Print Head Alignment on other occasions such as:
If the Print Head makes contact with • any object- whether it’s a garment or a
Shirtboard
If your prints contain vertical lines or misaligned parts of an image•
If you see banding of any kind•
Please be aware, should the Print Head make contact with ANY solid surface, it
may be permanently damaged and require replacement.
Whether you are completing the Initial Setup, or correcting minor printing
concerns, you must contact Technical Support for instructions on performing a
Print Head Alignment for your Fast T-Jet Blazer Express.
Performing a Head Alignment on a Fast T-Jet Blazer Express will
require approximately 1-2 hours. Before beginning this procedure
ensure you are familiar with all the required steps, as well as having
the necessary time to complete the process. Once you have
begun a Head Alignment you CANNOT exit the function without
shutting down the machine. In addition, early exit may result in
severe misalignment of the Print Head or other operational
concerns. Initial setup may require 2-3 alignment procedures to be
completed.
27
Chapter 4- Initialization Utilities