User`s manual
from this the position you may load or remove garments.
Pressing and holding the Index button for 2
seconds will move the Print Bed to the rear
of the printer. When in this position, you may
perform various the maintenance functions such
as Nozzle Checks, Head Alignments, etc.
Pressing and holding the Nest button for 2
seconds will move the Printer Assembly forward
or backward and align it with the front sensor.
No printing or maintenance functions should
be performed from this position. This is ONLY to
check the functionality of the sensor.
By using the “Jog” options, you can control small movements of the Print Bed.
Pressing the FOR button, moves the Bed incrementally toward the front of •
the printer.
Pressing the REV button, moves the Bed incrementally toward the back of •
the printer.
Platen to Head Clearance Height Adjustment
Platen height on the Fast T-Jet Blazer Express
is manually adjusted, using the control knob
located on the Print Bed. (The Platen to Head
Clearance Adjustment screen may appear, but
its functions have been disabled.)
Rotating the knob clockwise raises the Platen.•
Rotating the knob counter-clockwise lowers •
the Platen.
System Printer Control Utility (SPCU)
Screen
The SPCU screen can be utilized instead of the menu on the printer’s LCD control
panelinspecicinstances.
Pressing the Reset button will clear the printer’s memory. You would use this
19
Chapter 3- Interacting with Your Printer
Platen Height
Adjustment Control