User`s manual

Fast T-Jet Blazer Express User’s Manual

The Roll & Scissors icon is referred to as Roll Cut Mode preceded

by any phrase above it such as “Ready (Roll Cut)” mode or

“Paper Out (Roll Cut)” mode.

DO NOT press or attempt to use any button on the Epson LCD

Display not covered in this Manual. Failure to follow this guideline

can result in extended downtime, ruined output and/or damage

to your printer that is not covered by warranty. If you note erratic

machine behavior when attempting to print, immediately shut

down the printer and contact Technical Support.

The User Interface (also referred to as the HMI)

The Fast T-Jet Blazer Express features a User Interface (UI) to add convenience

and function. The UI (or HMI) allows you to perform several operations from

its screens rather than using the LCD Display. Each screen is touch sensitive,

allowing you to navigate between screens or change screen settings with a

touchofanger.Therearecurrently4UIscreens.

The Mode Select Screen

The Mode Select Screen allows the selection

of two modes- Manual (used when running

any Maintenance Utilities) and Auto

(used when choosing the number of Print

Passes and sending a Print command from

FastARTIST for image output.)

To change from Manual mode to Auto

mode or vice versa, touch the virtual dial

once.

You MUST be in Manual mode to utilize any functions on the UI or

perform any Maintenance Utilities such as Head Cleanings, Head

Alignments, etc. To Print, you MUST be in Auto mode.

The Manual Mechanism Movement Utility (MMMU) Screen

The MMMU Screen controls the movement of the Printer Assembly prior to and

after completion of a printing job. The Assembly has three preset positions and

these are listed under the heading “Position”: Home, Nest and Index.

Pressing and holding the Home button for 2 seconds will eject the Print Bed and