User`s manual
Resetting the Bulk Ink Cartridges
Your Bulk Ink System Cartridges have smart chips built-in that are designed to
count the number of ink drops dispensed. After a certain amount of ink has
been used, a typical inkjet cartridge chip tells the printer it is out of ink. However,
thesystemisinefcientwhenusedforacontinuous-owBulkInkSystem.
We have equipped each cartridge with a new smart chip, but if you print
continuously for an long period of time, the chip may still believe the cartridge is
low on ink when in reality it is not. If this does occur, remove the cartridge that is
indicating Low Ink and use the Reset Module to change its status. The module’s
Red light will blink while it resets the chip. The Red light will transition to a SOLID
Green when the reset is complete.
The process of resetting the smart chip is demonstrated in the following three
Images.
Placement of the Shirtboard
The Blazer Express standard Shirtboard should be placed
in the Landscape orientation. The oversized Shirtboard is
to be mounted in the Portrait orientation. Both Shirtboards
have Yellow and Black “This Side Out” stickers to assist
you with placement. Before operating the printer, ensure
these labels can be viewed from the Load position.
15
Chapter 2- Unpacking and Setup
Standard Size
Shirtboard Labels
Oversize
Shirtboard Label