User`s manual

opening. When pouring the ink, lift the funnel out of the hole slightly, to allow air

toescapeandfacilitateasmoothow.

DONOToverllthecartridge.Therearehashmarksonthefrontofeach

cartridge denoting increments of 50 ml, with the top mark referencing 200 ml.

DO NOT add ink beyond this mark.

Reseatthecapintheopeningofthenewlylledcartridgeandrepeatthe

procedureforeachcoloruntilalleightBulkInkCartridgeshavebeenlled.

The cartridges are numbered from 1-8. Using these numbers as a guide, place

the Bulk Ink cartridges into your Fast T-Jet Blazer Express and lower both blue

levers to secure them in place. The colors CMYK will be placed in slots 1-4, with

White FastINK placed in slots 5-8.

Changing Ink Brands

Your Fast T-Jet Blazer Express shipped with FastINK Textile Ink. With a normal inkjet

printer, it is a very common practice to change from the manufacturer’s brand

of ink to third party inks. However, this can result in serious issues when using

specially formulated textile inks. All textile inks are NOT created equal and they

must not be mixed. Should you decide to try another brand of textile ink in your

printer,beforedoingsoyouMUSTushouttheentireBulkInkSystemusinga

specialushingsolutionavailablefromU.S.Screen.

Failure to perform this process can result in a mixture of the two brands, creating

a chunky mess that might be called severe “cholesterol” in the ink tubes. In fact,

this mixture will permanently clog the Print Head. U.S. Screen is not responsible

for any damage to your printer or replacement of the Print Head should you

use another manufacturer’s ink. If you do experience problems with another

manufacturer’s ink you must contact THAT manufacturer for any available

remedies.

Fast T-Jet Blazer Express User’s Manual