User`s manual

Getting Ready to Print

Your Fast T-Jet Blazer Express uses a

specially designed Bulk Ink System

with cartridges that hold about 200

ml of ink per color (x8) and allow for

easyre-llingasneeded.Inorderto

prevent damage and ink leakage,

your printer was not shipped with

the Bulk System installed. To prevent

components from drying out, it is

shipped with cleaning cartridges. You

will need to remove these prior to use

because these cartridges do NOT

contain textile ink.

To remove the cleaning cartridges, locate the blue levers to the right side

of each bank of four. Moving these levers to the UP position will release the

cartridges. With the lever in the DOWN position, cartridges will be locked in

place.

Move both levers to the UP position and remove the cleaning cartridges. Store

them in a cool, dark environment for future use.

Filling the Bulk Ink Cartridges

Your printer comes with 8 oz. (250 ml) bottles

of Cyan, Magenta, Yellow and Black FastINK3,

along with 1 liter of FastINK Bright White. You will

alsond8continuousowinkcartridgesand8

funnels. 1 cartridge will be used for each of the

4 colors and 4 cartridges will be dedicated for

White.

During initial setup, and whenever ink cartridges

runlow,youmustllthemmanually.Choosean

area where spills will not do much damage and

protect the area with newspaper, paper towels

or a drop cloth. It is recommended you also wear

disposable gloves.

Tollacartridge,refertothecolorcodingonthe

cartridge for the correct ink to add, then remove

the cap and place the funnel into the top

Chapter 2- Unpacking and Setup

The Bulk System that shipped with your Fast

T-Jet Blazer Express may or may not look

exactly like the one shown here.