User`s manual

Placement of Your Printer
When determining where to set up your printer, keep in mind the Fast T-Jet Blazer
Express requires an area of at least 10 ft x 10 ft (3.6 m x 3.6 m) for the printer
and workspace around it. Additional space is required for drying, pretreating
garments, garment staging, etc.
TheBlazerExpress’naldestinationMUST BE A STURDY TABLE OR OTHER
PLATFORM. For operator comfort, we recommend the height of the platform be
at least 30”. This table must be able to support the full weight of your printer
(200 lb. / 91 kg) as well as all accessories, such as a Shirtboard, Inks and
garments. The table MUST also be able to incorporate the entire “footprint” of
the machine across its surface. NO PART of the Fast T-Jet Blazer Express should
overhang an edge.
The table or platform must also provide a stable base which will not transmit
vibrations from surrounding equipment and which will not be subject to
vibrations from movement of the printer during image output. Failure to minimize
these vibrations will seriously affect nal print quality.
An simple and effective solution would be to use the crate in which the Blazer
Express was shipped to you. Perhaps even drape a table cloth or other material
over it to help catch spills. If you don’t wish to use the shipping crate, McMaster-
Carr Inc. specializes in heavy-duty stands. Their website is www.mcmaster.com.
Overview of Printer Connections
9
Chapter 2- Unpacking and Setup
Power Switch
AC Power Cord Plug-In
USB Connection