User`s manual

Chapter 2

Unpacking and Setup

Save the Crate and All Packing Materials

Failure to follow this step will VOID YOUR WARRANTY.

Your Fast T-Jet Blazer Express is a very large piece of equipment and it is shipped

in a sturdy crate with bracing to hold delicate components in place. Unpack

your printer with care and please retain all shipping materials, bags, boxes and

directions received with the printer. These items will be needed in the event the

machine must be returned for repair or transported to another location. If you

return or ship a Fast T-Jet Blazer Express without using the original shipping carton

you may void the warranty. The crate may be disassembled for storage.

Unpacking your Fast T-Jet Blazer Express

The Fast T-Jet Blazer Express is shipped fully assembled in one large crate. You

should have received and signed a Pre-Installation Checklist prior to the arrival

of your printer. This Checklist outlined the importance of room conditions and

other details necessary for your machine to maintain optimal performance

levels.

You MUST be very careful transporting your T-Jet Blazer Express. It is very heavy

and a delicate piece of equipment. DO NOT uncrate your printer until it has

reacheditsnaldestination.Theexteriorcratedimensionsare55”x42”x33”.

This means the unit will need to be tipped 90

and placed on a dolly or rolling

cart in order to pass through standard 36” doorways. As shipped, the packing

material will allow for this and prevent damage to your printer as long as the

crate is not dropped.

Important Note:

The printer and shipping crate combined weigh close to 300

pounds. Because of the bulk of the machine, this is a MINIMUM

TWO PERSON lift. In addition, DO NOT attempt to lift the machine

from the crate with less than two people. Position one person at

each end of the Printer Assembly and ensure any lifting is done

using the four handles.