User`s manual

Chapter 1
Introduction
The Fast T-Jet Blazer Expressisaninkjetprinterthathasbeenmodiedtoprint
on almost any type of fabric material as well as non-textiles, such as golf balls,
keyboards, tennis balls, etc. (The ink will not work on waterproof nylon and most
syntheticmaterials.)Inthepast,thistypeofprintingwasdifcult,ifnotimpossible
to do because there were no inks available that would work on both 100%
cotton or 50/50 cotton/polyester blends AND withstand the rigors of washing.
ThatallchangedwiththeintroductionofFastINKTextileInk.Designedspecically
for these materials, FastINK requires only a post-treatment of heat to cure when
printed on lighter shirts. It’s even possible to print with White ink on dark shirts with
the application of a Pretreatment. This ink is so versatile it can even be used for
printing on non-textiles by applying Fast T-Jet Non-Textile Pretreatment to the
item before printing and Fast T-Jet Non-Textile Post-Treatment to the item after
printing.
The Blazer Express is based on standard inkjet technology, with the Epson
4880 being the heart of the system. This means you can expect your printer
to be reliable AND versatile. The Fast T-Jet Blazer Express is also fast, printing a
standard, T-Shirt sized image in under two minutes. Whether it’s a shirt, a towel,
mouse pads, tote bags, bibs or baseball caps, the possibilities are endless.
Fast T-Jet Blazer Express Important Points
Please read this entire Manual FIRST before attempting to Print on
any garment.
The Basics
You probably can’t wait to get started and we share your enthusiasm for the
garmentdecorationprocess.However,beforeyouprintthatrstshirt,thereare
a few basics that need to be covered.
The Fast T-Jet Blazer Express prints best on 100% cotton. Printing on dark colored
50% cotton/50% polyester blends with White ink is NOT recommended because
you will notice a discoloration of your image. Red garments will turn your Whites
1