Specifications

Northwest Graphic Supply Co.
4200 East Lake St. • Minneapolis, MN 55406
186
nwgraphic.com
nwgraphic.com
PRESSURE WASHER MONTI-POWER
THE IDEAL TOOL FOR CLEANING FRAMES
AND REMOVING ADHESIVE
MBX tools are constructed to optimize the performance
of the MBX belts and vinyl eraser. Safety, durability,
ease of operation and the ability to perform a wide vari-
ety of surface preparation task make the MBX a "must
have" tool.
MBX Screen Printing belts will quickly strip epoxy, mesh
and ink from aluminum screen frame in a single opera-
tion
The cleaned surface has sandblast-like texture which is
perfect for bonding new screen mesh
No heat or odor is created when removing epoxy and
screen residue
MBX belts clean the surface evenly - so surface con-
tours, sharp edges or uneven texture
New aluminum frames can be textured for initial bond-
ing
MBX belts are safe and durable and can be easily re-
used for a long performance life.
MBX-USSE-050 Montipower Electric
MBX-USSP-01 Montipower Air Drive
MBX-WF Wire Wheel Fine
MBX-WM Wire Wheel Medium*
*Recommended for cured adhesive removal
EMULSION ELIMINATOR III
The Emulsion Remover III Pressure Washer delivers
1000 psi of power delivered through a long lasting
brass head pump. The special nozzle on the Eliminator
III is completely adjustable from a narrow pinpoint
stream to a wide fan spray. The ergonomically
designed spray gun and steel lance makes for easy and
accurate cleaning of screens.
Specifications;
Water Volume 2.1 GPM
Pump Construction Brass
Electrical 115V, 60 Hz
Fuse Protection 15 Amp
Maximum Water Temp. 140° F
Nozzle Type Adjustable
E-44-4616-0 Eliminator III Pressure Washer
CAST ALUMINUM NOZZLES
This cast-aluminum, specially-designed nozzle won’t
damage the mesh and can be purchased separately in
9” width. It’s smooth rounded design and plastic end
caps make this the ideal vacuum tool for use on
screens.
AWT-SV-2 9” Cast Alum Nozzle
MONTIPOWER ELECTRIC MOTOR
MONTIPOWER AIR DRIVEN