Specifications

Northwest Graphic Supply Co.
4200 East Lake St. • Minneapolis, MN 55406
184
nwgraphic.com
nwgraphic.com
AUTOMATIC EMULSION REMOVER
AFFORDABLE AUTOMATIC RECLAIMING
Features:
1000 P.S.I. Completely cleans
Eliminate Mess: Completely closed
system.
Eliminate Mixing and Using
Caustic Chemicals in the Open:
Not needed with the closed system
Cleans Screens Quickly
Cleans most screens in 60 sec-
onds or less. No lost time or produc-
tion
Recycles Chemistry: The least
expensive system to operate available
Eliminates Disposal Costs: Only
pigment laden filters require costly dis-
posal. (Check with local water treatment
facility)
Extremely Durable: Welded
polypropylene body on an aluminum
frame.
The Screen Systems Automatic
Emulsion Remover brings 1000 p.s.i.
power to a recirculating system. Using a
high powered removing fluid instead of
plain water, this system combines the
benefits of high pressure and efficient
chemistry. A unique priming system
allows the use of an electric pump with
air powered filtration. The proven fan
spray technique provides maximum
pressure transfer to the screen. This is the
latest advance in emulsion removal
available anywhere. We feel that this is
the safest system available for both the
worker and the environment. All the
operator is required to do is place the
screen in the holding easel and push one
button. At that point, one of the dual air
pumps delivers our Screen Systems
approved biodegradable emulsion
remover to the 1000 p.s.i. pump, then to
the scanning spray head. The fan shaped
spray moves across the screen providing
maximum surface agitation and pressure.
This agitation combined with the power
of Screen systems approved emulsion
remover completely clean any screen in
a about one minute in the 9110-1 (sizes
to 27x36").
After emulsion remover runs off of the
screen, it flows into the drain in the bot-
tom of the cleaning chamber. There it is
picked up by the second pump and pow-
ered through a bag filter. This removes
particles to one micron in size, effective-
ly removing almost all emulsion to be
properly disposed of. The emulsion
remover fluid is then returned to the
reservoir for reuse. Because the remover
fluid is filtered before being returned to
the reservoir, there is no sump to clean
out.
The cabinet and most components are
made of welded polypropylene. This
makes them almost indestructible while
being light weight.
Controls are all solid state with easy to
read LED display. While a standard
cycle time is set at the factory, it can be
easily changed to meet any job. The sys-
tem uses 12 volts (standard household
current is 115 volts) for controls and a 20
amp line for the pressure pump. A UL
approved 12 volt converter is supplied
with the system. The automatic washer
can not be operated with the top open.
Air supplied should not exceed 100 psi
or 20 c.f.m.
Compressed air source of 100 p.s.i. at 10
c.f.m. required from an external source
(not included with washer).
U.S. Patent No. 5,056,948