Specifications

Northwest Graphic Supply Co.
182
nwgraphic.com
nwgraphic.com
DIAMOND CHASE TENSION QUICK
MANUAL SCREEN STRETCHERS
GENERAL
OPERATION
INSTRUC-
TIONS
CAUTION:
The roller bars
should only be
rotated toward
you!
NOTE:
If roller bars are removed for cleaning
BE SURE TO CAREFULLY NOTE HOW THEY ARE
POSITIONED. If the roller bars are reversed they will NOT
work.
To remove roller bars rotate them one third, approximately,
and they will come out.
BE SURE LOCKING RODS ARE REMOVED IF ROLLER
BAR IS ROTATED A FULL REVOLUTION.
1. Insert frame with the affixing surface facing up. One or
more frames can be done at one time.
2. Use hex wrench to position all four roller bars with rod
extrusion closest to the inside and affixing frame as shown.
Rod opening slot must be in the vertical position at start.
3. Place fabric over roller bar opening. Fabric needs to
extend 1" beyond the outside edge of the four rollers. Insert
both rods (push first of the two rods in slot and push to center
toward affixing frame, then insert second rod next to it and
use pizza roller in center of two nylon rods and roll the entire
length of groove to set the two in securely). Do all four
sides, one side then the opposite side, making sure that the
fabric is as square as possible and that it is as tight as can be
snugged by hand.
4. Take spanner wrench and tighten a few clicks on each of
the four sides. Then continue to snug up by a click or two on
each side to the tension desired.
5. Softening the corners prevents tearing fabric. Place
insertion tool in the groove and roll back and forth approxi-
mately one to two inches at corner. At the same time press
on the fabric at the corner to relieve pressure. This is done to
all four corners.
6. After desired tension is achieved apply adhesive to the
affixing frame as shown in the SCREEN SYSTEMS
Adhesive Instruction Sheet.
DIAMOND CHASE TENSION-QUIK
ADJUSTABLE FABRIC STRETCHER
Now you can have ONE fabric stretching system that
adjusts easily and quickly to any size with only one sim-
ple tool.
This newest TENSION-QUIK product is available in any
length. Four identical frame sections constitutes a sys-
tem set. One 1-1/2” hex wrench is included and is used
to tension the fabric by rotating the roller bar in each of
the four frame sections. The four frame sections are
designed to nest together allowing the frame sections to
slide back and forth and therefore to adjust to any
frame size or proportion. No Bolts or tools are required.
This feature allows easy and quick assembly, adjust-
ment to size and disassembly for compact storage.
The frame sections are precision extruded of a special
aluminum alloy and Heli-Arc welded to give them maxi-
mum stiffness and durability. The price is the same for
standard or custom sizes. All prices are computed by
the inside lineal inch.
Available in Double Rod Top Loading fabric locking sys-
tem or Keystone Slotted Rod fabric loading system.
Please specify.
Standard Size Stretcher;
E-TQ-2525 Tension Quick 25x25” Adjustable
Stretcher
(Available in any size)
Accessories;
E-TQ-0005 Tension Quick Allen Wrench
E-TQ-0006 Tension Quick Pizza Roller Insertion
Tool