Specifications
612-729-7361 ---- Phone
612-729-6647 ---- Fax
800-221-4079 ---- Toll Free Phone
800-544-7022 ---- Toll Free Fax
167
nwgraphic.com
GAS TEXTILE DRYERS
ANATOL HI-PERFORMANCE GAS DRYERS
ANATOL Conveyor Dryers are leading the industry in
dryer design and innovation at a cost that makes them
the best buy in the dryer market. These dryers provide
even curing of plastisol, puff, nylon, waterbase and
most evaporative inks. It offers the highest temperature
ranges and ultimate drying control available. Excellent
pricing for a high production dryer. Gas is ideal for all
types of textile printing, plastisol, water-base, nylon etc.
ANATOL brings experience, technology, innovation and
reliability to the printer who needs ultimate dryer con-
trol.
Features include;
• Belt width 48”, 60” and 72”
• Recirculating blower with 2200 cfm
• 500 cfm exhaust blower
• Temperature control and temperature profiling feature
• 450 degrees fahrenheit maximum temperature
• Two burner’s 440,000 BTU, compatible with natural
or LP gas
• Centralization malfunction diagnostics system
• Solid State 1/4 hp DC drive control for the conveyor
• Digital belt speed display
• Automatic, Temperature controlled cool-down mode
• Heat exchanger for incoming ambient air
• No negative pressure, thanks to outside air utilization
• High efficiency thermal insulation
Galvanized interior construction
• 3 Phase 208-230VAC/6.6 Amps
• 12’ Heat length chamber
• 5’ Infeed, 5’ Outfeed Standard, 22’ Overall
• Two Years Limited Warranty
Dryers;
MGD-II-48-12 48” Mariah II Dryer, 12’ Oven
MGD-II-60-12 60” Mariah II Dryer, 12’ Oven
MGD-II-72-12 60” Mariah II Dryer, 12’ Oven
Three Burner (MGD-III) models available.
ANATOL STANDARD GAS DRYERS
ANATOL Conveyor Dryers are leading the industry in
dryer design and innovation at a cost that makes them
the best buy in the dryer market. The dryers provide
economical even curing of plastisol, puff, nylon, water-
base and most evaporative inks. It’s Exclusive Split Air
Delivery System allows uniform high speed air flow
inside the dryer. Prices make this an excellent choice
for a start up high production dryer. Gas is ideal for all
types of textile printing, plastisol, water-base, nylon etc.
Gas does not scorch the way radiant dryers do. For a
little more GET A LOT MORE
Features include;
• Belt width 30”, 38”, 48”, 60”, and 72”
• Recirculating blower with 2200 cfm
• 500 cfm exhaust blower
• Temperature control and temperature profiling feature
• 450 degrees fahrenheit maximum temperature
• A single burner is 220,-- BTU and is compatible with
natural or LP gas
• Centralization malfunction diagnostics system
• Solid State 1/4 hp DC drive control for the conveyor
• Digital belt speed display
• Automatic, Temperature controlled cool-down mode
• Heat exchanger for incoming ambient air
• No negative pressure . . . thanks to outside air utilization
• High efficiency thermal insulation
Galvanized interior construction
• 3 Phase 208-230VAC/6.6 Amps
• 10’ Heat length chamber
• 5’ Infeed, 5’ Outfeed Standard, 20’ Overall
• Two Years Limited Warranty
Dryers;
MGD-1-30 30” Mariah Dryer, 7’6” Oven
MGD-1-38-07 38” Mariah Dryer, 7’6”’ Oven
MGD-1-38-10 38” Mariah Dryer, 10’ Oven
MGD-1-48-10 48” Mariah Dryer, 10’ Oven
MGD-1-60-10 60” Mariah Dryer, 10’ Oven
MGD-1-72-10 72” Mariah Dryer, 10’ Oven
ANATOL STANDARD GAS DRYER
ANATOL HIGH PERFORMANCE GAS