Operator`s manual

TTM 57SL FOR SERATO SCRATCH LIVE • OPER ATOR’S MANUAL 1.9.2
47
RECORD BURN - This section of the control vinyl has
been worn. Swap sides or use the track start offset.
BAD RECORD BURN - Your record is very badly worn
and Scratch Live is unable to track correctly. Swap
sides or get new vinyl ASAP.
TONEARM IS SLIGHTLY TOO LIGHT - Susceptible to
dust and vibration. Adjust the tonearm.
LEFT CHANNEL MISSING - The signal from the needle
is not reaching the TTM 57SL Check the cable and
cartridge connections.
LEFT CHANNEL IS NOISE - Left signal has been lost
with a noisy loose connection.
TONEARM IS EXTREMELY LIGHT - The needle isn’t
sitting in the groove. Increase the tonearm weight.
RIGHT CHANNEL MISSING - The signal from the
needle is not reaching the TTM 57SL. Check the cable
and cartridge connections.
RIGHT CHANNEL IS NOISE - Right signal has been
lost with a noisy loose connection.
RIGHT CHANNEL IS INTERFERENCE - Right signal
has been lost with a noisy loose connection and left
channel crosstalk.