Operator`s manual
TTM 57SL FOR SERATO SCRATCH LIVE • OPER ATOR’S MANUAL 1.9.2
41
P1 PHASER FREQUENCY / FLANGER
DELAY / TAP BPM
The Phaser’s primary function of P1 (indicator
off) is lter design frequency, which starts at 722
Hz and is adjustable from 31.5 Hz to 16 kHz (9
octaves). The full sweep of the lter is reached in
1
1
/
3
rotations of P1.
The Flanger’s primary function of P1 (indicator
off) is Base Delay, adjustable from 0 to 11.6
milliseconds. The Base Delay sets the high
frequency point of the sweep. The Depth control
(P2) sets the range of the swept comb lter.
If the track has a BPM tag, the sweep
automatically matches it and a lock icon appears
in the BPM section. To manually set the sweep
BPM, tap P1 to the beat. The default BPM is
120, and tapping P1 can set it from 24 to 480
with a resolution of 0.1 BPM. A single Tap of P1
resyncs the sweep to the BPM.
J1 MULTIPLIER
The BPM Multiplier is selected with J1, toggling
between transform operation and BPM multiplier.
If the green mode indicator is on, J1 may adjust
the multiplier to 16, 8, 4, 2, 1, ¾, ½, or ¼.
P2 FEEDBACK / DEPTH
Feedback is the primary function of P2 (indicator
off) controlling the amount of phased or delayed
signal fed back to the input, increasing “fatness.”
Minimum to maximum is 1
1
/
3
rotations of P2.
Depth is adjusted using the second function
of P2 (green indicator on). Depth sets how far
the sweep of the LFO (low frequency oscillator)
modulates the Frequency (Phaser) or Delay
(Flanger) as set by P1. The Phaser Depth is
adjustable from 0 to ±4.5 octaves, and the Delay
Depth is adjustable from 0 to 11.6 ms. The full
range is reached in 1
1
/
3
rotations of P2. With
Depth at minimum, the LFO ceases to have any
effect, and P1 becomes a manual sweep control.
J2
WET / DRY MIX
Pressing J2 toggles between transform
operation (indicator off) and Wet / Dry control
(green indicator on). The phaser / anger default
is 100% wet. J2 has the same operation on all
effects. SEE “J2 WET / DRY MIX” ON PAGE 40.
ECHO EFFECTS CONTROL
ASSIGNMENTS
If the track has a BPM tag, the Echo BPM is
automatically set and a lock icon appears in the
Echo section. To manually set the BPM of the
Echo, tap P1 (or the footswitch) to the beat.
ECHO EFFECT DIFFERENCES
• Feedback starts at 70% and is adjustable from
0% to 94%.
• Feedback generates as long as it is inserted.
• P2 has no second function in the Echo Effect.
GROUPDECK
P1 P2
J1
B1 B2
1 2
B3 B4 B5 B6
J2
PROCESSOR 1
DELAY FEEDBACK
HP ECHO FREQTAP BPM
PROCESSOR 2MULTIPLIER
PGM 1 PGM 2 AUX B MAIN ON ON
INSERT POINT CUE EFFECT
ALL WET
MORE
DRY
ALL DRY
MORE
WET
1
3/4
1/4 8
2
1/2
16
4
P1
•
Delay
B1
PGM 1
•
B2
PGM 2
•
B3
AUX
•
B4
MAIN
•
PGM 1
PGM 2
AUX
MAIN
B6
•
Delay is set by BPM tag.
Tap
P1
•
for manual BPM.
•
P2
Feedback
range = 0 to 94%
Echo starts to
build when effect
is inserted
on
B1
•
B2
•
B3
•
B4
•
HP ECHO EFFECT DIFFERENCES
• Each delay cycle repeatedly runs through a
second-order High Pass Filter having a set
resonance of 0.7.
• Filter Cutoff Frequency is adjusted with the
second function of P2 (green indicator on),
adjustable from 31.5 Hz to 16 kHz (9 octaves).
The full sweep of the lter is reached in 1
1
/
3
rotations.
B1
PGM 1
•
B2
PGM 2
•
B3
AUX
•
B4
MAIN
•
PGM 1
PGM 2
AUX
MAIN
B6
•
Delay is set by BPM tag.
Tap
P1
•
for manual BPM.
•
P2
Feedback
range = 0 to 94%
Echo starts to
build when effect
is inserted
on
B1
•
B2
•
B3
•
B4
•
P1
•
Delay
P2
•
Frequency
HP Filter