Operator`s manual

TTM 57SL FOR SERATO SCRATCH LIVE • OPER ATOR’S MANUAL 1.9.2
39
BP Filter is an automatically sweepable Band
Pass Filter, with the following response:
P1
•
Frequency31.5 Hz 16 kHz
Sweep
min 0.7
max 6.0
•
P2 Resonance
•
P2P1
•
single
tap BPM
sync
point,
multiple
taps to
set BPM.
Depthmin
HP Filter is an automatically sweepable High
Pass Filter, with the following response:
(In case you are wondering, a high pass is the
same as a low cut.) Each Filter’s settings are
independent from the other Filters.
P1 FREQUENCY / TAP BPM
If the track has a BPM tag, the Filter sweep
automatically matches it and a lock icon appears
in the Filter section. To manually set the sweep
BPM, tap P1 to the beat. The default BPM is
120, and tapping P1 can set it from 24 to 480
with a resolution of 0.1 BPM. A single Tap of P1
resyncs the sweep to the BPM.
The primary function of P1 (indicator off) is
Cutoff Frequency, which starts at 722 Hz and is
adjustable from 31.5 Hz to 16 kHz (9 octaves).
The full sweep of the lter is reached in 1
1
/
3
rotations of P1.
J1 MULTIPLIER
The BPM Multiplier is selected with J1, which
toggles between transform operation and BPM
multiplier. If the green mode indicator is on, J1
may adjust the multiplier to 16, 8, 4, 2, 1, ¾, ½,
or ¼.
P1
•
Frequency31.5 Hz 16 kHz
Sweep
•
P2
max 3.0
min 0.7
P1
•
single
tap BPM
sync
point,
multiple
taps to
set BPM.
Depth min
•
P2 Resonance
SWEEP FILTER CONTROL
ASSIGNMENTS
Three Filters have the same parameters, but are
different lter types:
LP Filter is an automatically sweepable Low
Pass Filter, with the following response:
GROUPDECK
P1 P2
J1
B1 B2
1 2
B3 B4 B5 B6
J2
PROCESSOR 1
FREQUENCY RESONANCE
DEPTHTAP BPM
PROCESSOR 2MULTIPLIER
PGM 1 PGM 2 AUX B MAIN ON ON
INSERT POINT CUE EFFECT
ALL WET
MORE
DRY
ALL DRY
MORE
WET
1
3/4
1/4 8
2
1/2
16
4
P1
•
Frequency31.5 Hz 16 kHz
Sweep
max 3.0
min 0.7
•
P2P1
•
single
tap BPM
sync
point,
multiple
taps to
set BPM.
Depthmin
•
P2 Resonance