Operator`s manual

TTM 57SL FOR SERATO SCRATCH LIVE • OPER ATOR’S MANUAL 1.9.2
36
(GROUP B4) CUEING & LOOPING
To access this group, press the GROUP button
on the mixer, then press B4. This group gives
you access to all the cue points and looping
functions. To select which of the Virtual Decks
a given effect is applied to, press the mixer’s
DECK button. The LED next to the button
indicates which of the Virtual Decks the software
function applies.
(GROUP B5) RECORDING
To access this group, press the GROUP button
on the mixer, then press B5. In this group you
can select your input source, start and stop
recording, and load this new recording to either
Virtual Deck.
(GROUP B6) EFFECTS
The TTM 57SL has two built in effects processors.
Unlike other groups, when you are in the effects
group, the DECK button on the mixer switches
between these two effects processors. DECK
1 activates Processor 1, and DECK 2 activates
Processor 2. Each effect has parameters
controlled by P1 and P2. SEE: EFFECTS (PAGE 34)
The left joystick, J1, sets the BPM (tempo)
multiplier. Set the BPM by tapping P1 to the
beat, or manually adjust by turning P1. The
optional footswitch can also tap in the BPM. Use
the left joystick to quickly halve, split, double or
quadruple the tempo. The buttons B1 through
B4 set the effect’s insert point: either PGM, the
Aux bus (which includes the Mic) or the Main
output.
Previous loop.
Jump to Cue points. Loop on / o
(toggle).
Next loop.
Control looping
from the footswitch.
Turn to adjust, and push to set loop in point. Turn to adjust, and push to set loop out point.
Hold the joystick
up or down and
press a B button to
set a cue point.
Scroll through your crates and library. Push to load track on right deck.Push to load track on left deck.
Stop and erase the
last recording.
Start recording from
the footswitch.
Start recording.
Load to
left deck.
Load to
left deck.
Load to
right deck.
Load to
right deck.
Select recording
source by scrolling
up or down.
Functions vary depending
upon the assigned eect.
Functions vary depending
upon the assigned eect.
Tap to set BPM. Turn eect on and o.Assign eect to: PGM 1. PGM 2. AUX BUS. MAIN.
Select eect.
Cue
eect.
Eect
on / o.
BPM
multiplier.
Wet / Dry control.
– = more dry.
+ = more wet.
up = all wet.
down = all dry.