Operator`s manual

TTM 57SL FOR SERATO SCRATCH LIVE • OPER ATOR’S MANUAL 1.9.2
35
(GROUP B1) GENERAL CONTROLS
(CUSTOM GROUP 1)
This is the rst group shown below with default
commands when you rst start Scratch Live.
These give you basic playback controls and up
to three cue points per Virtual Deck. The orange
arrows (left) control the left Virtual Deck and the
blue (right) arrows control the right Virtual Deck.
The joysticks default to transform mode (LEDs
off). Press the joystick in (LED on) to activate its
controls as shown here.
(GROUP B2) LIBRARY
(CUSTOM GROUP 2)
In this second custom group, many of the
functions can be applied to either of the Virtual
Decks. To select which of the Virtual Decks a
given effect is applied to, press the mixer’s DECK
button. The LED next to the button indicates
which of the Virtual Decks the software function
applies.
(GROUP B3) PLAYBACK
To access this group, press the GROUP button
on the mixer, then press B3. This group contains
all the software functions required for mixing in
int mode. To select which of the Virtual Decks a
given effect is applied to, press the mixer’s DECK
button. The LED next to the button indicates
which of the Virtual Decks the software function
applies.
Scroll through your crates and library. Push to load track on right Deck.
Hold the joystick
down and press a
B button to set a
cue point on the
left Deck.
Joystick left to jump to
the temporary point on
the right Deck.
Jump to Cue points on the
left Deck.
Jump to Cue points on the
right Deck.
Joystick right to
‘Double’ : Copy the
track from the left
Deck to the right
Deck.
Control looping
from the footswitch.
Push to load track on left Deck.
Hold the joystick
up to play the
track backwards
momentarily then
release to jump
ahead with timing
intact.
Scroll through your crates and library. Push to load.
Hold the joystick
down and press
one of the B
buttons to set a
cue point.
< = previous loop.
> = next loop.
Jump to Cue points. Loop on / o
(toggle).
Joystick right to
‘Double’: Copy the
track from the left
Deck to the right
Deck.
Joystick right to
‘Double’: Copy the
track from the
right Deck to the
left Deck.
Control looping
from the footswitch.
Push to undo the
last action.
Hold the joystick
up to play the
track backwards
momentarily then
release to jump
ahead with timing
intact.
Nudge forward or back.
Playback modes.
Play /
Pause.
Set temp
cue point.
Hold to play from
temp cue. Release
returns to temp cue.
Joystick up: Zoom
in the waveform.
Push (LED on) and
turn to quickly
shuttle through
the track.
Control looping
from the footswitch.
Joystick down:
Zoom out the
waveform.
Hold the joystick
up to play the
track backwards
momentarily then
release to jump
ahead with timing
intact.
Play the track
reverse from the
current position.
<< = Rewind
.
>> = F
ast forward.