Specifications

Page10
4 Installing the TAG
It is important to correctly attach the TAG to the cow's neck in a secure manner in order
to avoid them from turning or falling off.
To securely attach the TAG to the cow’s neck:
1. Ensure that your TAG assembly kit includes the following parts:
i. HR-TAG-LDn or cSense Flex
ii. Belt, Weight & Buckle
2. Open the outside locker of buckle using the buckle opener (supplied with each
system) or a large flat screwdriver.
3. Mount the belt on the cow's neck in a way that the TAG is positioned on the upper
left side of the cow’s neck (when looking from behind).
4. Closely fasten the belt around the cow’s neck with a maximum of 1-2 fingers gap
between the belt & the neck.
5. Tighten the buckle's lever to lock the belt. Make sure that the buckle is completely
closed and secured (pushed in all the way)
A properly mounted TAG should look like this picture: