AMUT03 Monitoring Neck TAG SPECIFICATIONS
©Copyright SCR Engineers LTD. 2016 This eSense Flex V2 TAG Specification is copyrighted. All rights are reserved and no part of this publication may be reproduced or transmitted in any form or by any means without prior written consent. Disclaimer The information in this manual was accurate and reliable at the time of its release. However, we reserve the right to change the specifications of the product described in this manual without notice at any time.
AMUT03 FCC ID: AMUT03 Manufacturer: SCR Engineers Ltd. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Wants You to know NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Industry Canada Notice: IC: 26436-AMUT03 - This Class B digital apparatus complies with Canadian ICES-003. - Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. This device complies with Industry Canada ICES-003 licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Page5
1 Global system specifications All units are for outdoor use, required Radio regulations according to target market & Low voltage 24VDC regulation (except for TAGs which powered by internal battery). 1.1 System components HR-TAG-LDn / cSense Flex/ Monitoring Neck Tag Flex – Activity-based TAG with 2.4GhZ transceiver & IRDA receiver. IDUxxx – Local TAG identification unit with a serial network interface (CAN BUS or Current Loop), IRDA transmitter & 2.4GhZ Receiver ONLY.
1.
2 TAG Specifications Product Model/Name Product Name - AMUT03 – Cow Monitoring Neck TAG Model 1 – HR-TAG-LDn Model 2 – cSense Flex Model 3 –Monitoring Neck Tag Flex The difference between models is SW and enclosure color ONLY. 2.1 General description A neck TAG mounted on a collar on the animal neck, used for the following: 1. Identification of animal using 2.4GHz transceiver and optical IRDA receiver and/or NFC reader unit. 2. Measure various animal parameters, processes and transmit them via 2.
2.4 NFC Parameters 2.5 Mechanical dimensions Utilizing Passive internal NFC High-Frequency inlay (IC and Antenna) complying with the following standards • ISO/IEC 15693-2, -3 • ISO/IEC 18000-3 Compliant • 13.56-MHz Operating Frequency • Occupied bandwidth 0.5MHz All dimensions in mm 3 Environmental Conditions 1. IP – IP67. 2. Operational temperature -33°C to 50°C. 3. Storage – TBD 4. Transportation Complies with ETS 300 019 -2-2 T2.3 Complies with ETS 300 019 -2-1 T 1.
4 Installing the TAG It is important to correctly attach the TAG to the cow's neck in a secure manner in order to avoid them from turning or falling off. To securely attach the TAG to the cow’s neck: 1. Ensure that your TAG assembly kit includes the following parts: i. HR-TAG-LDn or cSense Flex ii. Belt, Weight & Buckle 2. Open the outside locker of buckle using the buckle opener (supplied with each system) or a large flat screwdriver. 3.
5 Product marking – Regulatory ID – e-Labeling Access to regulatory information is available via the management web application or mobile application.
