SCR HR-TAG-LD SPECIFICATIONS [CONFIDENTIAL] Ver 0.
HR_TAG_LD SPECIFICATIONS 2 Ver 0.16 Version History: 0.10 0.11 0.12 0.13 0.14 0.15 0.16 Initial version Add mechanical dimensions & target market Minor names fixes Products names update Block Diagram update RF Parameters update Rf Transceiver update to AT86RF233 and new FCC ID Contents 1. Global system specifications ............................................................................................................................................... 4 1.1. Target market ......................
HR_TAG_LD SPECIFICATIONS 3 Ver 0.16 FCC ID: $087 HR-TAG-LD Manufacturer: SCR Engineers Ltd. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
HR_TAG_LD SPECIFICATIONS 4 1. Ver 0.16 Global system specifications All units are for outdoor use, required radio regulations according to target market & Low voltage 24VDC regulation (except for tags which powered by internal battery). 1.1.
HR_TAG_LD SPECIFICATIONS 5 2. HR-TAG-LD Specifications 2.1. General description Tag is a unit mounted on a collar on the animal neck, used for the following: 1. Identification of animal using 2.4Ghz and/or optical unit. 2. Measure various animal parameters, Process then and transmit them via 2.4Ghz. The tag initiates transmission of 3 messages/hour by itself or upon request from ID unit. Outdoor installation, sealed unit, powered from internal 3.6V battery. 2.2. 2.
HR_TAG_LD SPECIFICATIONS 7 Ver 0.16 3. Installing the tag It is important to correctly attach the tags to the cow's neck in a secure manner in order to avoid them from turning or falling off. To securely attach the tag to the cow’s neck: 1. Ensure that your tag assembly kit includes the following parts: i. HR-Tag ii. Belt, Weight & Buckle 2. Open the outside locker of buckle using the buckle opener (supplied with each system) or a large flat screwdriver. 3.
