SCR H-TAG-LD SPECIFICATIONS [CONFIDENTIAL] Ver 0.
Version History: 0.10 0.11 0.12 0.13 0.14 0.15 0.16 Initial version Add mechanical dimensions & target market Minor names fixes Products names update + add R-TAG-LD Block Diagram update RF Parameters update RF Transceiver update to AT86RF233, New FCC ID Contents 1. Global system specifications ................................................................................................... 4 1.1 1.2 2 System components ..................................................................................
H-TAG-LD FCC ID: AMUT01 Manufacturer: SCR Engineers Ltd. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Wants You to know NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
1. Global system specifications All units are for outdoor use, required Radio regulations according to target market & Low voltage 24VDC regulation (except for tags which powered by internal battery). Target market 1.
1.
2 H-TAG-LD Specifications 2.1 General description Tag is a unit mounted on a collar on the animal neck, used for the following: 1. Identification of animal using 2.4GhZ and/or optical unit. 2. Measure various animal parameters, Process then and transmit them via 2.4GhZ. The tag initiates transmission of 3 messages/hour by itself or upon request from ID unit. Outdoor installation, sealed unit, powered from internal 3.6V battery. 2.2 2.
2.
4 Installing the tag It is important to correctly attach the tags to the cow's neck in a secure manner in order to avoid them from turning or falling off. To securely attach the tag to the cow’s neck: 1. Ensure that your tag assembly kit includes the following parts: i. H-Tag ii. Belt, Weight & Buckle 2. Open the outside locker of buckle using the buckle opener (supplied with each system) or a large flat screwdriver. 3.
