User's Manual

SenseTime_Controller Specification V0 07 Page 3
2.2 SenseTime Controller RF Parameters
 Two RF Modules FCC ID: AMUBUM
o RF Frequency Tx/Rx: 2.4GHz
 IEEE 802.15.4 standard
 Channels 11(2.405 GHz) to 26(2.480 GHz) for a total of 16 RF Channels.
o Baud Rate: 250K Bit/Sec (Not configurable)
o Output RF Power: 10mW Maximum
o Internal Antenna type: Internal diversity patch antenna, ~10dBi, directional
 Contains vertical and Horizontal antennas, RF transmitting done ALWAYS
only via one antenna, as default via Vertical antenna. Second antenna
(horizontal) always at Rx mode.
 NFC
o Passive complies ISO15693
2.3 Technician Interfaces
 USB OTG
 Diagnostic port
2.4 External connections
 ETH / POE PD 802.3at
 ETH / POE PSE 802.3at
 Optional – RS 485
 Optional – Unit power from limited source of 24VDC +/-10%(*)
 Optional I/O – one input and one output 24VDC/GND
Note:- * In case of using 24VDC as power source no POE over PSE interface