Owner`s manual

SCOTTY SS – INSTRUCTION MANUAL
Scotty SS Nov-05
9
(a) Keep area around unit clean and clear of combustibles.
(b) Use only dry wood. DO NOT burn garbage, gasoline or naphtha.
(c) Load carefully.
(d) Remove ashes as directed.
(e) Watch for soot build up in smoke pipe – clean regularly.
(f) Clean furnace heat exchanger regularly.
(g) Be aware of danger due to over firing of the unit.
(h) Do not load above maximum loading level (middle of loading door) or
overheating may result.
(i) This unit is NOT suitable for automatic stoking.
(j) Load carefully. Do not slam fuel against rear or sides of firebox, this may
damage the firebox.
(k) Always observe the following minimum clearances to combustible
materials – Front 48” (1220 mm); one side 6” (152 mm); opposite side and
rear 24” (610 mm); and flue pipe 18” (465 mm).
(l) Do not store solid fuel within the above clearances or within the space
required for charging and ash removal.
(m) Establish a routine for storage of fuel, care of the appliance, and firing
techniques.