Operator`s manual
Table Of Contents
- Introduction
- Product Identification
- Table of Contents
- Safety
- Understanding The Machine Safety Labels
- DANGER-WARNING: AVOID SERIOUS INJURY OR DEATH
- DANGER: POISON
- DANGER: ROTATING BLADE-THROWN OBJECTS
- DANGER: ROTATING BLADE
- Emission Control System Certification Label
- Emission Compliance Period
- Certification
- Operating Safely
- Operate Mower Safely
- Parking Safely
- Checking Mowing Area
- Rotating Blades are Dangerous
- Avoid Tipping
- Keep Riders Off
- Wear Appropriate Clothing
- Driving Safely on Public Roads
- Practice Safe Maintenance
- Prevent Fires
- Tire Safety
- Handling Fuel Safely
- Handling Waste Product and Chemicals
- Operating
- Daily Operating Checklist
- Avoid Damage to Plastic and Painted Surfaces
- Operator Station Controls
- Adjusting Seat
- Adjusting Cutting Height
- Adjusting Mower Deck Wheels
- Adjusting Mower Level (Side-to-Side)
- Adjusting Mower Level (Front-to-Rear)
- Testing Safety Systems
- Testing Mower Engagement Lever Switch
- Testing Seat Switch
- Testing Park Brake Switch
- Testing Park Brake
- Testing Reverse Implement Option (RIO)
- Using Park Brake
- Starting Engine
- Idling Engine
- Stopping Engine
- Using Travel Controls on Gear Transmission
- Using Travel Controls on Automatic Transmission
- Using Cruise Control
- Using The Reverse Implement Option (RIO)
- Using Mower Lift Lever
- Using Mower
- Mower Blade Selection
- Using Mower Deck Side Discharge (42-Inch Mower Deck)
- Using Mower Deck Mulch Ready (42-Inch Mower Deck)
- Using Mower Deck with Optional Equipment (42-Inch Mower Deck)
- Pushing Machine
- Unplugging Mower or Optional Bagger
- Transporting Machine on Trailer
- Avoid Using Ground Engaging Equipment
- Using Wheel Weights
- Using Tire Chains
- Mowing Tips
- Replacement Parts
- Service Intervals
- Service Lubrication
- Service Engine
- Engine Warranty Maintenance Statement
- Avoid Fumes
- Engine Oil (Gas)
- Checking Engine Oil Level
- Changing Engine Oil and Filter
- Cleaning Air Intake Screen and Engine Fins
- Checking and Cleaning Air Cleaner Elements (Model S1642)
- Checking and Cleaning Air Cleaner Elements (Model S1742)
- Checking and Cleaning Air Cleaner Elements (Model 2046)
- Checking Spark Plugs
- Adjusting Carburetor
- Replacing Fuel Filter
- Service Steering and Brakes
- Service Mower
- Service Electrical
- Service Miscellaneous
- Troubleshooting
- Storage
- Specifications
- Assembly
- Warranty
- Index
- Notes
- Quality Statement
- Service Record
Assembly - 55
ASSEMBLY
• If tractor/mower deck is being set-up for side discharger
or 2-bag bagger DO NOT install mulch cover kit. (See
Using Mower Deck Side Discharge OR Using Mower Deck
with Optional Equipment in the Operating Mower section.)
Check Tire Pressure
1. Check tires for damage.
2. Check tire pressure with an accurate gauge.
3. Add or remove air, if necessary.
c
CAUTION: Avoid injury! Explosive separation
of tire and rim parts is possible when they are
serviced incorrectly:
• Do not attempt to mount a tire without the
proper equipment and experience to perform
the job.
• Do not inflate the tires above the
recommended pressure.
• Do not weld or heat a wheel and tire
assembly. Heat can cause an increase in air
pressure resulting in an explosion. Welding
can structurally weaken or deform the wheel.
• Do not stand in front or over the tire
assembly when inflating. Use a clip-on chuck
and extension hose long enough to allow you
to stand to one side.