Operator`s manual
Table Of Contents
- Introduction
- Product Identification
- Table of Contents
- Safety
- Understanding The Machine Safety Labels
- DANGER-WARNING: AVOID SERIOUS INJURY OR DEATH
- DANGER: POISON
- DANGER: ROTATING BLADE-THROWN OBJECTS
- DANGER: ROTATING BLADE
- Emission Control System Certification Label
- Emission Compliance Period
- Certification
- Operating Safely
- Operate Mower Safely
- Parking Safely
- Checking Mowing Area
- Rotating Blades are Dangerous
- Avoid Tipping
- Keep Riders Off
- Wear Appropriate Clothing
- Driving Safely on Public Roads
- Practice Safe Maintenance
- Prevent Fires
- Tire Safety
- Handling Fuel Safely
- Handling Waste Product and Chemicals
- Operating
- Daily Operating Checklist
- Avoid Damage to Plastic and Painted Surfaces
- Operator Station Controls
- Adjusting Seat
- Adjusting Cutting Height
- Adjusting Mower Deck Wheels
- Adjusting Mower Level (Side-to-Side)
- Adjusting Mower Level (Front-to-Rear)
- Testing Safety Systems
- Testing Mower Engagement Lever Switch
- Testing Seat Switch
- Testing Park Brake Switch
- Testing Park Brake
- Testing Reverse Implement Option (RIO)
- Using Park Brake
- Starting Engine
- Idling Engine
- Stopping Engine
- Using Travel Controls on Gear Transmission
- Using Travel Controls on Automatic Transmission
- Using Cruise Control
- Using The Reverse Implement Option (RIO)
- Using Mower Lift Lever
- Using Mower
- Mower Blade Selection
- Using Mower Deck Side Discharge (42-Inch Mower Deck)
- Using Mower Deck Mulch Ready (42-Inch Mower Deck)
- Using Mower Deck with Optional Equipment (42-Inch Mower Deck)
- Pushing Machine
- Unplugging Mower or Optional Bagger
- Transporting Machine on Trailer
- Avoid Using Ground Engaging Equipment
- Using Wheel Weights
- Using Tire Chains
- Mowing Tips
- Replacement Parts
- Service Intervals
- Service Lubrication
- Service Engine
- Engine Warranty Maintenance Statement
- Avoid Fumes
- Engine Oil (Gas)
- Checking Engine Oil Level
- Changing Engine Oil and Filter
- Cleaning Air Intake Screen and Engine Fins
- Checking and Cleaning Air Cleaner Elements (Model S1642)
- Checking and Cleaning Air Cleaner Elements (Model S1742)
- Checking and Cleaning Air Cleaner Elements (Model 2046)
- Checking Spark Plugs
- Adjusting Carburetor
- Replacing Fuel Filter
- Service Steering and Brakes
- Service Mower
- Service Electrical
- Service Miscellaneous
- Troubleshooting
- Storage
- Specifications
- Assembly
- Warranty
- Index
- Notes
- Quality Statement
- Service Record

Operating - 13
OPERATING
Starting Engine
NOTE: Engine will not start unless mower is
disengaged and transmission is in neutral.
1. Disengage mower blades.
2. Lock the park brake.
3. Put transmission in neutral.
4. Check starting conditions:
Picture Note: Model 2046
•
If engine is cold:
On Model 2046, move throttle lever (A) to the half-speed
(
R
) position and pull out choke (
k
) knob (B). Gradually
push in the choke knob after the engine starts and
warms up.
On all other Models, move throttle lever (A) to the choke
(
k
) position.
•
If engine is warm:
On Model 2046, pull out choke (
k
) knob (B). Push
choke knob in as soon as the engine starts.
On all other Models, move throttle lever (A) to the half-
speed (
R
) position.
5. Turn key to start position (C) for no longer than five
seconds.
6. Release key to run position (D) when engine starts.
• If engine does not start, wait 10 seconds.
• Turn key to start position again for no longer than 5
seconds.
• Repeat procedure if necessary.
7. Let engine run at half-speed (
R
) position for a couple of
minutes to warm-up before operating machine.
Idling Engine
c
CAUTION: Avoid injury! Engine exhaust fumes
contain carbon monoxide and can cause
serious illness or death.
Move the vehicle to an outside area before
running the engine.
DO NOT run an engine in an enclosed area
without adequate ventilation.
• Connect a pipe extension to the engine
exhaust pipe to direct the exhaust fumes out of
the area.
• Allow fresh outside air into the work area to
clear the exhaust fumes out.
A
B
A
IMPORTANT: Avoid damage! Starter may be
damaged if starter is operated for more than 20
seconds at a time:
• Wait two minutes before trying again if engine
does not start.
IMPORTANT: Avoid damage! Unnecessary engine
idling may cause engine damage. Excessive idling
can cause engine overheating, carbon build-up, and
poor performance.
IMPORTANT: Avoid damage! Unnecessary engine
idling may cause engine damage. Excessive idling
can cause engine overheating, carbon build-up, and
poor performance.
C
D