Instructions / Assembly

10056091
8-17-2017 6:51 PM Steve Iacona / Steve IaconaSaved at Nonefrom iMac-17-1a by Printed At
Approvals
Client
Built At
Output At
Scale
Bleed
Trim
Viewing
Live
Vendor
Contact
Scotts
100%
100%
1” = 1”
8” h x 31.625” w 7.75” h x 31.375” w
7.75” h x 31.375” w 7.75” h x 31.375” w
None
[e-mail]
Job info
8x8 4PANEL 8 PGfold_INSIDE
Notes/Special Instructions
Art Director
Copy Editor
PM
None
None
None
Fonts
Hellix (Regular, Heavy)
Inks
Cyan, Magenta, Yellow, Black,
PMS Cool Gray 7 C, PMS 3288 C
Images
Grow_Potted_Drip_r1.ai (70%, 50%, 19.49%,
30%, 35%, 25%, 24.8%, -24.8%, 66%, 43.67%),
Sprayer_Kit_Pieces_20170715_GREY_r1.ai
(25%)
Fonts & Images
Component List
In the Pack
Bag 1
Quick Connect
Hose/Spigot Connector
Water Flow
Reducer & Filter x 1
Bag 2
Bag 3
Micro
Dripper × 4
Micro
Dripper × 4
Micro
Tubing Stake × 4
Micro
Tubing Stake × 4
End Plug × 1
End Plug × 1
T-Joint
Connector × 4
T-Joint
Connector × 4
Loose in
the pack
Micro
Tubing x 1
50 ft (15 m)
Installation
Tool x 1
Step 1
Connect to Water Source
Keep in mind where you will
need to place the tubing
to reach your plants, begin
laying out the Micro Tubing.
Tip: Lay your Micro Tubing
out in the sun for a few
minutes to soften it up
before assembling.
Step 2
Layout Micro Tubing
Plan Micro Setup
Watch Quick Start Video
Go to www.mygro.com/drip
Lay out Micro Tubing—put it in the
sun for a few minutes to help
soften it up.
Identify the spigot, timer, or
hose you want to connect to.
Gather additional tools: scissors.
Components needed
Bag 1
Loose in
the pack
Components needed
Loose in
the pack
Simply pull back the
coupling to slide on
Micro Tubing.
Option A
Your Existing
Garden hose
Timer
(Not Included)
Water Flow
Reducer & Filter
Micro Tubing
Spigot
Option B
Connect your Potted Drip Kit to a
water source using this diagram as
a guide.
Option A If you are planning
to use a timer to control your
system, attach it first to your
spigot or hose, and then attach
the Quick Connect Hose/Spigot
Connector to your timer.
Option B If you plan to use your
existing hose, attach your hose
to your spigot, and then attach
the Quick Connect Hose/Spigot
Connector to your hose.
Quick Connect
Hose/Spigot
Connector
T:31.375”
T:7.75”
B:31.625”
B:8”
F:7.875”
FS:7.75”
F:7.875”
FS:7.625”
F:7.875”
FS:7.625”
F:7.75”
1005609_T51151_Gro Potted Drip Kit Quick Start Guide_INSIDE rev 8.17_r1.indd 1 8/17/17 6:52 PM