Instructions / Assembly

Your Gro
™
Water Sensor can be placed
in the soil near plants. Just insert the
Sensing Probes completely into the soil.
This can be in pots, containers, raised
bed gardens, or your garden. The Gro
™
Water Sensor has a range of up to 300
feet from the Gro
™
Hub. However, this
distance can vary depending on
obstructions between the Gro
™
Water
Sensor and Gro
™
Hub, such as walls or
other sources of electrical interference.
Step 3
Place the Gro
™
Water Sensor
near your favorite plant.
Step 2
Install batteries
Unscrew the bottom portion of the sensor
and pull the battery terminal cap o. Look
inside the Gro
™
Water Sensor for the
positive and negative battery positions.
Then insert the AAA batteries into the
housing, replace the battery cap, and
screw the bottom portion back onto the
sensor.
Step 1
Plug in Gro
™
Hub
Skip to Step 2 if your Gro™ Hub is
already installed
Gro
™
Hub must be placed indoors within
your Wi-Fi range to pair. This is typically
within 150 feet but will vary depending on
your network. Gro
™
Hub cannot be used
outdoors.
A Gro™ Hub is required for Water Sensor
operation. This is sold separately with the
Gro™ Water Sensor Starter Kit. Visit
mygro.com for more information.
Component List
In the Box
What you will need
• Gro™ Hub (sold separately, visit
m
ygro.com for more information)
• iOS or Andr
oid Device
• Int
ernet Service and Wi-Fi Router
Gro
™
Water Sensor AAA Batteries x 2