SDS

_______________________________________________________________________________________________
Scotts® Turf Builder® Winterguard Plus 2®, Zero Phosphorus, 28-0-3
MSDS Ref. No.: 39905-1
5. FIRE-FIGHTING MEASURES
Explosion potential: Dust at sufficient concentrations may form explosive mixtures with air.
Hazardous combustion products: Combustion can produce toxic fumes and irritating gases.
Fire fighting procedures: Select appropriate method to surround and extinguish fire
Special protective equipment for
firefighters:
In the event of fire, wear self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Avoid contact with skin, eyes and clothing.
Environmental precautions: Prevent product from entering drains.
Methods for containment: Clean up promptly by sweeping or vacuum.
Methods for cleaning up: If material is uncontaminated, collect and reuse as recommended for product. If material is contaminated,
put in appropriate container and dispose.
7. HANDLING AND STORAGE
Handling: Avoid container breakage. Avoid inhalation or contact with skin, eyes, or clothing. Do not contaminate water sources when disposing of
equipment wash waters. Keep out of lakes, streams or ponds. Keep out of reach of children and pets.
Storage: Keep containers tightly closed in a cool, well-ventilated place
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Components ACGIH: OSHA:
2,4-Dichlorophenoxyacetic acid (2,4-
D)
10 mg/m
3
TWA 10 mg/m
3
TWA
(R)-2-(4-Chloro-2-
methylphenoxy)propionic acid
(Mecoprop-p)
Not Listed Not Listed
Potassium sulphate, K2SO4 Not Listed Not Listed
Sulphur, S Not Listed Not Listed
Urea Not Listed Not Listed
Ammonium sulphate, (NH4)2SO4 Not Listed Not Listed
Engineering controls Use adequate ventilation to keep the airborne concentrations of this material below the recommended
exposure standard
Personal Protective Equipment
Eye/face protection Protective eye wear is normally not required but suggested so contact can be avoided.
Skin and body protection: No special protective clothing is required under normal workplace conditions. To reduce exposure potential
when applying product, wear long-sleeved shirt, long pants, shoes, and socks. After using product, remove
clothing and wash before reuse.
Respiratory protection: If airborne levels are high or product does not remain intact, use a combination of engineering controls
(e.g. ventilation) and personal protection, e.g., NIOSH/MSHA approved respirator for dusts, mists, and
fumes.
General hygiene considerations: Wash hands before breaks and immediately after handling the product
Re-entry Interval: When dust has settled.
9. PHYSICAL AND CHEMICAL PROPERTIES
10. STABILITY AND REACTIVITY
Chemically Stable: Yes.
Conditions to avoid: Extreme heat. Contact with strong alkalies, oxidizers, and reducing agents. Contact with fuels and other
organic or combustible materials. Active metals such as aluminum, magnesium, and chlorine compounds.
Materials to avoid: Strong acids, bases, oxidizers, and reducing agents.
Hazardous decomposition products: Combustion may produce irritating gases and vapors. Toxic metal oxides may be produced.
Possibility of hazardous reactions: Poses little or no immediate hazard.
Solid
Odor: Phenoxy Solubility: Slightly soluble
Color: Tan
Revision date:
Bulk density: 41-47 lbs/cu ft
Page 2 of 4
Physical State:
Appearance: Granular