SDS

SCOTTS OUTDOOR CLEANER HOUSE & SIDING
WITH ZEROSCRUB TECHNOLOGY
Page:6/12
Version: 1.0 Date of issue/Date of revision: 04/27/2018 Date of previous issue: 00/00/0000
chlorides
Nonanoic acid
None.
Ethanol
OSHA PEL 1989 (1989-03-01)
TWA 1,900 mg/m3, 1,000 ppm
OSHA PEL (1993-06-30)
TWA 1,900 mg/m3, 1,000 ppm
NIOSH REL (1994-06-01)
TWA 1,900 mg/m3, 1,000 ppm
ACGIH TLV (2008-11-24)
STEL , 1,000 ppm
Appropriate engineering controls :
Use only with adequate ventilation. Use process enclosures, local
exhaust ventilation or other engineering controls to keep worker
exposure to airborne contaminants below any recommended or
statutory limits. The engineering controls also need to keep gas, vapor
or dust concentrations below any lower explosive limits. Use
explosion-proof ventilation equipment.
Environmental exposure controls :
Emissions from ventilation or work process equipment should be
checked to ensure they comply with the requirements of
environmental protection legislation. In some cases, fume scrubbers,
filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
Individual protection measures
Hygiene measures :
Wash hands, forearms and face thoroughly after handling chemical
products, before eating, smoking and using the lavatory and at the end
of the working period. Appropriate techniques should be used to
remove potentially contaminated clothing. Wash contaminated
clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection :
Protective eyewear.
Skin protection
Hand protection :
Chemical-resistant, impervious gloves complying with an approved
standard should be worn at all times when handling chemical products
if a risk assessment indicates this is necessary. Considering the
parameters specified by the glove manufacturer, check during use that
the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be
different for different glove manufacturers. In the case of mixtures,
consisting of several substances, the protection time of the gloves
cannot be accurately estimated.
Body protection :
Wear coveralls over long-sleeved shirt, long pants, shoes with socks.,
Remove and wash contaminated clothing before reuse.
Other skin protection :
Appropriate footwear and any additional skin protection measures
should be selected based on the task being performed and the risks
involved and should be approved by a specialist before handling this
product.
Respiratory protection :
Use a properly fitted, air-purifying or air-fed respirator complying