SDS

SCOTTS MOSS EX
Page:5/10
Version: 1.0 Date of issue/Date of revision: 01/24/2018 Date of previous issue: 00/00/0000
Conditions for safe storage,
including any incompatibilities
:
Store in accordance with local regulations. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area,
away from incompatible materials (see Section 10) and food and
drink. Keep container tightly closed and sealed until ready for use.
Containers that have been opened must be carefully resealed and kept
upright to prevent leakage. Do not store in unlabeled containers. Use
appropriate containment to avoid environmental contamination.
Section 8. Exposure controls/personal protection
Occupational exposure limits
None.
Appropriate engineering controls :
Use only with adequate ventilation. Use process enclosures, local
exhaust ventilation or other engineering controls to keep worker
exposure to airborne contaminants below any recommended or
statutory limits.
Environmental exposure controls :
Emissions from ventilation or work process equipment should be
checked to ensure they comply with the requirements of
environmental protection legislation. In some cases, fume scrubbers,
filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
Individual protection measures
Hygiene measures :
Wash hands, forearms and face thoroughly after handling chemical
products, before eating, smoking and using the lavatory and at the end
of the working period. Appropriate techniques should be used to
remove potentially contaminated clothing. Wash contaminated
clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection :
Protective eyewear is not required, but may be used in situations were
contact is expected.
Skin protection
Hand protection :
Chemical-resistant, impervious gloves complying with an approved
standard should be worn at all times when handling chemical products
if a risk assessment indicates this is necessary. Considering the
parameters specified by the glove manufacturer, check during use that
the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be
different for different glove manufacturers. In the case of mixtures,
consisting of several substances, the protection time of the gloves
cannot be accurately estimated.
Body protection :
Wear long-sleeved shirt, long pants, shoes with socks., Remove and
wash contaminated clothing before reuse.
Other skin protection :
Appropriate footwear and any additional skin protection measures
should be selected based on the task being performed and the risks
involved and should be approved by a specialist before handling this
product.
Respiratory protection :
Use a properly fitted, particulate filter respirator complying with an
approved standard if a risk assessment indicates this is necessary.
Respirator selection must be based on known or anticipated exposure