MSDS
_______________________________________________________________________________________________
Scotts Turf Builder with Moss Control, 22-2-2
MSDS Ref. No.: 33505-2
Special protective equipment for
firefighters:
In the event of fire, wear self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Avoid contact with skin, eyes and clothing.
Environmental precautions: Do not let product enter drains.
Methods for containment: Vacuum or sweep up material and place in a disposal container.
Methods for cleaning up: If material is uncontaminated, collect and reuse as recommended for product. If material is contaminated,
put in appropriate container and dispose.
7. HANDLING AND STORAGE
Handling: Avoid container breakage. Avoid inhalation or contact with skin, eyes, or clothing. Do not contaminate water sources when disposing of
equipment wash waters. Keep out of lakes, streams or ponds.
Storage: Keep containers tightly closed in a dry, cool and well-ventilated place.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Components ACGIH: OSHA:
Urea Not Listed Not Listed
Potassium sulphate, K2SO4 Not Listed Not Listed
Ammonium Phosphate Not Listed Not Listed
Ammoniumsulphate, (NH4)2SO4 Not Listed Not Listed
Ferrous Sulfate Monohydrate (Iron
Sulfate)
1 mg/m³ TWA as Fe Not Listed
Engineering controls Use adequate ventilation to keep the airborne concentrations of this material below the recommended
exposure standard
Personal Protective Equipment
Eye/face protection: Eye/face protection is not required, but is recommended in manufacturing situations where contact may
occur.
Skin and body protection: No special protective clothing is required under normal workplace conditions. After using product, remove
clothing and wash before reuse.
Respiratory protection: If airborne levels are high or product does not remain intact, use a combination of engineering controls
(e.g. ventilation) and personal protection (e.g. NIOSH/MSHA approved respirator for dusts, mists, and
fumes.
General hygiene considerations: Wash hands before breaks and immediately after handling the product.
9. PHYSICAL AND CHEMICAL PROPERTIES
10. STABILITY AND REACTIVITY
Chemically Stable: Yes.
Conditions to avoid: Extreme heat. Contact with strong alkalies, oxidizers, and reducing agents. Contact with fuels and other
organic or combustible materials. Active metals such as aluminum, magnesium, and chlorine compounds.
Materials to avoid: Strong acids, bases, oxidizers, and reducing agents.
Hazardous decomposition products: Combustion may produce irritating gases and vapors. Toxic metal oxides may be produced.
Possibility of hazardous reactions: Potentially explosive with methyl isocyanoacetate.
11. TOXICOLOGICAL INFORMATION
Acute toxicity
LD50/oral: >2.650 mg/kg, rat
LD50/dermal: >2.0 g/kg, rabbit
LC50/inhalation: >5.27 mg/L , (dust), rat
Bulk density: 49 lbs/cubic meter
Solid
Solubility: No information available Flash point: Not applicable
Appearance: Granular
Revision date: 25-Jul-2005 Page 2 of 4
pH: 3.12
Physical State: