CXT 20 Alarm Clock Radio with weather station INSTRUCTION MANUAL GB
PRECAUTIONS Follow the instructions below to ensure the product is used safely and correctly. PLACEMENT . Do not use the unit in places which are extremely hot, cold, dusty, or humid. . Place the unit on a flat and even surface. . Do not restrict the airflow around the unit by placing it in a place with poor ventilation, covering it with a cloth, or placing it on a carpet. . Do not place the unit close to heat sources. . Use the unit only in moderate climates (not in tropical climates). .
BOX CONTENTS 1. 4. Main unit 2. AC/DC adapter Temperature/humidity sensor with suction cup 3. Instruction manual DESCRIPTION OF THE UNIT Main unit 1 7 8 2 3 9 4 1 5 10 11 1. H/M: Hours, Minutes (°C/°F) buttons 2. : Time set button 3. SNOOZE button 4. LCD display 5. : Alarm set button 6. Speaker 7. : Sleep button 8. RADIO ON/OFF button 9. : Indoor/Outdoor reading 12 13 14 15 16 17 10. 11. 12. 13. 14. 15.
LCD display 1. Outdoor- Very dry weather 2. PM indication (afternoon). This indication only appears if the 12-hour clock display is selected 3. Time 4. Alarm indicator 5. Outdoor - Humid weather 6. Temperature in °C or °F 7. Outdoor - Mild weather 8. Outdoor readings indicator 9. Indoor readings indicator 10. % humidity 1 2 6 7 3 4 5 8 9 10 INSTALLING THE BATTERIES Main unit Clock back up The clock and alarm time can be saved by using two AAA/LR03 (1.5V) batteries (not supplied).
Clock and Alarm time setting Set the clock 1. Press the 2. Press the button and the digits will flash. Press the H/M buttons to set hours/ minutes. button to confirm. Set the alarm time 1. Press the button and the digits will flash. Press the H/M buttons to set hours/minutes. 2. Press the button to confirm. Note: Hold down the button to select 12-hour or 24-hour clock display. Using the alarm function The unit can wake you up with a buzzer or with the radio. 1.
USING THE WEATHER STATION Wireless temperature/humidity sensor After installing the batteries, position the remote sensor outdoors no more than 15 metres from the main unit. It can be mounted in two different ways: • Using the hanger slot at the back, hang the remote sensor on the wall with a screw. • You can also insert the suction cup in the hanger slot and press the suction cup firmly against a window or other smooth surface.
USING THE RADIO Listening to the FM radio 1. Press the RADIO ON/OFF button to turn on the radio. 2. Turn the TUNING dial to search for an FM station. The TUNING dial indicator points to the selected frequency. 3. Adjust the volume by turning the VOLUME dial. 4. To turn off the radio, press the RADIO ON/OFF button. Note: Extend and position the FM antenna wire to achieve optimum reception. TROUBLESHOOTING GUIDE Problem Solution 1. The unit or display is not working properly 1.
TECHNICAL SPECIFICATIONS Operating range Temperature Humidity RF transmission frequency Range of the RF sensor Indoor Outdoor (Remote sensor) 0 to +50°C -20°C to +70°C 20% to 99% RH 20% to 99% RH 433 MHz Maximum 15m Radio Tuning range Antenna FM 87.
