Instruction manual

To erase a recorded cassette tape
1. Follow steps 1 to 5 in “Cassette tape playback” to play the cassette tape.
2.PresstheRECORDandPLAYbuttonstogethertostarterasing.
3.Tostoperasing,presstheSTOP/EJECTbutton.
Cleaning the tape heads
Tomaintainoptimumsoundquality,cleanthepinchroller(a),capstan(b),
playback/recordheads(c)anderasurehead(d)regularly(every10
hoursofuse).Useacottonswablightlymoistenedwithcleaninguid
or denatured alcohol.
a b c d
MAINTENANCE
Care and maintenance
Tocleantheunit,unplugitandwipeoffdustandstainswithasoftclothmoistenedwithamildsoapandwater
solution only. Do not use benzene, thinner or similar chemicals to clean the unit.
Cleaning CD discs
Ifthemusicskipsordoesnotplay,thediscmayneedcleaning.Beforeplayback,wipethediscfromthecenter
out with a clean cloth. After use, store the disc in its case.
If at any time in the future you should need to dispose of this product please note that Waste
electrical products should not be disposed of with household waste.Please recycle where
facilitiesexist.CheckwithyourLocalAuthorityorretailerforrecyclingadvice.
(WasteElectricalandElectronicEquipmentDirective)
TROUBLESHOOTING GUIDE
Problems
Recommendations
1. The player or display
does not work properly.
1.1 Press the ON/STANDBY button to go to standby mode
and press it again to turn on the unit.
1.2 Reset by unplugging the AC power cord for few seconds, then
plug it back in.
2. The disc do es not play.
2.1 Place the disc with the label side facing up.
2.2 Ensure that the disc is free from scratches and fingerprints.
2.3 Check that the discs/ file form ats are compatible; refer to
“
TECHNICAL SPECIFICATIONS
”.
2.4 Clean the disc.
3. USB device is not read.
3.1 Check that the USB device file system is in FAT or FAT32
format.
3.2 Due to different formats, some models of USB s torage devices
or MP3 players may not be read.
4. Noise or distorted
sound in radio mode.
4.1 FM mode: extend and position the FM antenna to achieve the
best reception.
4.2 In AM mode, orientate the unit to achieve optimum r eception
.
GB 6