Instruction manual

Programmed playback
Youcanprogramupto20tracks.
1. In STOP mode, press the PROGbuttonandthetracknumber“P01”willash.
2. Press the / buttons to select the track number.
3. Press the PROGbuttontoconrm.
4.Repeatsteps2and3abovetoprogramothertracks.
5.Toplaytheprogram,pressthebutton.
6.Tocleartheprogram,pressthebuttontwiceoropen/closetheCDcompartmentorgoto
standby mode.
WhenprogrammingaCDcontainingMP3 / WMAles,
you can press the FOLDER UP button to select the folder
inwhichyouwanttoprogramthetracks.
USB DEVICE OPERATION
Insert a USB device into the USB port at the back of the unit. When the unit is switched on, press the
FUNCTIONbuttonrepeatedlytoselectthe"USB"mode.Referto“CD/ MP3 / WMA PLAYER OPERATION”
to play MP3/ WMAles.
Note: Due to technical differences, some models of USB storage
devices or MP3 players may take longer to be read. In some cases, they may not even be read.
AUX IN FUNCTION
This unit has an AUX IN jack which allows you to connect an external audio device (such as an MP3 player)
usingacable.
1.Pluganaudiocable(notsupplied)intotheAUXINjack.
2. When the unit is switched on, press the FUNCTION button to select “AUX”.
3. Operate your external audio device as usual to select and play music.
4. Adjust the volume controls on both your external audio device and this unit to the desired volume level.
Note: In AUX IN mode, this unit display cannot show any music information (e.g. track number) for your
external audio device.
CASSETTE TAPE OPERATION
Cassette tape playback
1. When the unit is switched on, press the FUNCTION button to select “TAPE” (cassette).
2. Press the STOP/EJECT button to open the cassette compartment.
3. Gently insert the cassette tape into the cassette compartment as shown.
Note:Thecassettecompartmentdoorisdesignedtopreventtheuserfrom
insertingthecassetteupsidedown.Impropercassettetapeinsertionmay
damagethecassettedeckinsidetheunit.
4. Close the cassette compartment.
5. To start playback, press the PLAY button.
6. To stop playback, press the STOP/EJECT button.
7.Topauseplayback,pressthePAUSEbutton.Toresumeplayback,pressitagain.
8. To fast forward or fast rewind, press the F.FWD or REWIND button.
Press the STOP/EJECT button to stop at the desired position.
Cassette tape recording
1. When the unit is switched on, press the FUNCTION button to select the mode (CD, TUNER or AUX) and
launch playback.
2.Insertthecassettetape(seepreviousparagraph).
3. Press the PAUSE button.
4.PresstheRECORDandPLAYbuttonstogethertoplacerecordinginstandby.
5.PressthePAUSEbuttonagaintostartrecording.
6.Tostoprecording,presstheSTOP/EJECTbutton.
7.Topauserecording,pressthePAUSEbutton.Toresumerecording,pressitagain.
GB 5