Instruction manual

RECORDING
USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING.
1 . Insert the cassette tape.
2 . Press the PAUSE button.
PAUSE
4 . Prepare to play the source to be recorded and play it.
Recording from the radio Recording from a CD
FUNCTION
CD/USB
FUNCTION
RADIO
PLAY THE CD/USB TUNE INTO A STATION
3 . Press the RECORD button.
RECORD
5 . Press the PAUSE button.
TO STOP RECORDING
Press the STOP / EJECT button.
TO INTERRUPT RECORDING
Press the PAUSE button.
Toresumerecording,pressthePAUSEbuttonagain.
TO ERASE A RECORDED TAPE
1. Set the FUNCTION selector to TAPE.
2. Insertatapewiththesideyouwanttoerasefacingyou.
3. PresstheRECORDbuttontostarterasing.
CLEANING CD
IftheCDskipsorwillnotplay,thediscmayneedcleaning
.Beforeplaying,wipethediscfromthecentreoutwitha
cleaningcloth.Afterplaying,storethediscinitscase.
MAINTENANCE
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow
several times on the lens and remove the dust with the
brush.Fingerprintsmay beremovedwithacottonswab
moistened with alcohol.
GB 5
PAUSE
TO STOP PLAYBACK
Press the STOP / EJECT button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
Toresumeplay,pressthePAUSEbuttonagain.
TO FAST WIND
Press the REWIND or F.FWD button. Press the STOP/
EJECTbuttontostopwindingatthedesiredposition.
PLAY
3 . Press the PLAY button.
TAPE PLAYBACK
1 . Set to TAPE
FUNCTION
TAPE
2 . Insert the cassette.