GB SWM1070/SWM1071 STEREO MP3/WMA/USB/CD RADIO CASSETTE RECORDER INSTRUCTION MANUAL
WARNING CLASS 1 LASER PRODUCT CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM CLASS 1 LASER PRODUCT APPAREIL Á LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1 This product contains a low power laser device. Warning: Do not touch the lens. DO NOT THROW BATTERIES IN FIRE ! PRECAUTIONS Follow the advice below for safe and appropriate operations. ON PLACEMENT • Do not use the unit in places which are extremely hot, cold, dusty, or humid.
LOCATION OF CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. VOLUME CONTROL FUNCTION SWITCH CARRYING HANDLE CASSETTE PAUSE CASSETTE STOP/EJECT CASSETTE F.FWD CD OPEN BUTTON CD DOOR CASSETTE REWIND CASSETTE PLAY CASSETTE RECORD FM STEREO DIAL SCALE MODE SWITCH CD DISPLAY 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30.
POWER SUPPLY USING HOUSE CURRENT Before use, check that the rated voltage of your unit matches your local voltage. To AC socket USING BATTERIES Disconnect the AC power cord from the AC inlet of the unit. Battery power is cut automatically by the cord while it is connected. battery door To AC outlet When the volume decrease, or the sound distorts, replace all of the batteries with new ones. Insert eight UM-2 ( size C ) batteries. ADJUSTING THE SOUND TO ADJUST THE VOLUME MIN.
COMPACT DISC PLAYBACK 1. Set to CD 2. Open the disc holder by pushing the CD door open button. 3. 4. Insert a disc with the label side facing up. Close the disc holder. The disc will rotate and the total tracks of the disc will show on the display. 5. FUNCTION CD/USB Press the PLAY/PAUSE button. Track number "01" & the symbol " " & "DISC" will be shown during normal compact disc playback. Track number "001", the symbol " " & "DISC" & "MP3" will be shown during MP3 playback.
TO SKIP TO THE BEGINNING OF A TRACK • Press either one of the skip buttons according to the desired skip direction. • Play/back resumes from the selected track. CD display • When the button is pressed once during play, the previous track starts again. • When the button is pressed once during play, the next track plays.
TAPE PLAYBACK 1. Set to TAPE 2. Insert the cassette. 3. FUNCTION TAPE Press the PLAY button. PLAY TO STOP PLAYBACK Press the STOP / EJECT button. TO INTERRUPT PLAYBACK Press the PAUSE button. To resume play, press the PAUSE button again. TO FAST WIND Press the REWIND or F.FWD button. Press the STOP/ EJECT button to stop winding at the desired position. RECORDING USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING. 1. 4. Insert the cassette tape. Prepare to play the source to be recorded and play it.
CLEANING THE TAPE HEADS To maintain optimum sound quality, clean the playback/ record heads ( a ) ,erasure head (b), pinch rollers (c), and capstans (d) regularly (every 10 hours of use ). Use a cotton swab lightly moistened with cleaning fluid or denatured alcohol. c d a b CLEANING THE UNIT Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth.
