User manual

"BEEPS 2 ”, “BEEP ALL”, “BEEP OFF”
EQ
“
BAND
- When receiving an RDS station:
When
ND
-
The car audio device is equipped with 4 preset equalizer modes. Press the button to select one of the following EQ modes:
FLAT” “CLA S ” “ ” “ ” “DSP .
Press and hold down the button to turn the loudness on or off.
If the unit does not receive NO CLOCK
Loudness ON/ OFF
The car audio device is equipped with 3 beep tone modes.
- Beep mode: The beep sound is on when any key is pressed.
- Beep off mode: The beep sound is disabled.
In power on mode, press button repeatedly to select the different modes in the following sequence: RADIO, CD (with a disc inside
the disc slot) , USB(with USB device inserted), SD/MMC(with SD/MMC card inserted), AUX in mode.
- During disc, USB, SD/MMC card playback, if you turn off the unit and then switch on it, the unit will resume playing from the
point that it was interrupted.
MODE
Preset Equalizer
To select playback mode
Last position memory feature
Beep 2nd mode: The beep sound will be heard when you hold down a button with a dual function, which activates the second
function of this button.
on
S ICS POP M ROCK M OFF”
function
-During disc, USB, SD/MMC card playback, if you switch to other mode, and then return the previous mode again, the unit will
resume playing from the point that it was interrupted.
Press the button repeatedly to display as follows:
In radio mode: CT -> PTY(Type of program) -> PS (Name of the station) ->FREQUENCY ->
In CD/USB/SD/MMC mode: CT-> PTY(Type of program) -> FREQUENCY ->PS -> Track number /Running time or other
information
* CT or PTY information, the display shows “ ” or “PTY NONE”.
In radio mode:NO CLOCK->PTY NONE-> PS NONE ->FREQUENCY ->
In CD/USB/SD/MMC mode: NO CLOCK -> PTY NONE -> FREQUENCY -> PS NONE -> Track number /Running time or
other information
The selected information is displayed for 5 seconds, then the radio goes back to the first display mode after 5 seconds.
gggg
INFORMATION DISPLAY
DISP
- receiving a non RDS station:
GB-12