Instruction manual

GB 2
USING HOUSE CURRENT
Before use, check that the rated voltage ofyour unit matches your
localvoltage.
USING BATTERIES
Disconnect the AC power cord from the AC inlet of the unit. Battery power
is cut automatically by the cord while it is connected.
To AC outlet
When the volume decrease, or the sound distorts, replace all of
the batteries with new ones.
battery door
POWER SUPPLY
To AC socket
Insert batteries:
8 x 1.5 V (UM-2 or "C" size)
Press VOLUME +/- to adjust volume level. Volume level is shown on the display.
FOR PRIVATE LISTENING
Pluginheadphones(ø3.5mmstereomini-plug)tothePHONESjack.
Whenheadphonesarepluggedin,thespeakersareautomaticallydisconnected.
TO ADJUST THE VOLUME
ADJUSTING THE SOUND
PRE-SET EQ
Preset EQ : FLAT, JAZZ, ROCK, CLASSIC, POP.
Press PRESET EQUALIZER button to select your preferred
sound, preset mode is shown on the display.
1. Powerison/offbypressingSTANDBYbutton.
2. Thefunctionischangedcyclically
 bypushingFUNCTIONbutton:
CD USB TUNER AUX .
POWER ON/OFF AND FUNCTION CHANGE
STANDBY
VOL. +
VOL. -
PRESET EQ
The mute on/ off is changed cyclically by pressing MUTE
button.
The“mute”markisonduringmuteison.
The mute on is cancelled in case as shown below.
a. The power is off/on
b. The Volume is adjusted by the VOL +/- button.
MUTE ON/OFF
MUTE
AUX IN
Connect an external LINE OUT to AUX. IN socket at the back of the unit.
Press the FUNCTION button and select AUX mode.
( AUX IN CABLE NOT INCLUDED )
(Plugotherendinto
external source )