GB SDM60 PORTABLE MP3/USB BOOM BOX Instruction Manual CONTROLS 1. STOP /BAND/CLEAR BUTTON 2. ID 3/DISPLAY BUTTON 3. B-SKIP/DOWN BUTTON 4. REMOTE SENSOR INDICATOR 5. CARRYING HANDLE 6. LCD DISPLAY 7. MONO/STEREO/PLAY MODE BUTTON 8. CD PLAY / PAUSE 9. F-SKIP / UP BUTTON 10. MEMORY/CLOCK ADJ. BUTTON 11. STANDBY INDICATOR 12. M-UP/FOLDER UP BUTTON 13. TIMER/SLEEP BUTTON REMOTE CONTROL UNIT FUNCTION BUTTON STOP/BAND/CLEAR BUTTON 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27.
WARNING CLASS 1 LASER PRODUCT CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM CLASS 1 LASER PRODUCT APPAREIL Á LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1 This product contains a low power laser device. Warning: Do not touch the lens. DO NOT THROW BATTERIES IN FIRE ! PRECAUTIONS Follow the advice below for safe and appropriate operations. ON PLACEMENT • Do not use the unit in places which are extremely hot, cold, dusty, or humid.
POWER SUPPLY USING HOUSE CURRENT Before use, check that the rated voltage of your unit matches your local voltage. USING BATTERIES Disconnect the AC power cord from the AC inlet of the unit. Battery power is cut automatically by the cord while it is connected. battery door To AC outlet To AC socket When the volume decrease, or the sound distorts, replace all of the batteries with new ones. Insert batteries: 8 x 1.5 V (UM-2 or "C" size) Power on/off and function change 1. 2.
Clock adjustment 1. The clock is displayed on CD display at power off condition. 2. Press the MEMORY CLOCK-ADJ. button, hour of clock flash. 3. Press the F-SKIP/UP or B-SKIP/DOWN to adjust hour digit. 4. Press the MEMORY CLOCK-ADJ. button, the minute digit flash. 5. Press the F-SKIP/UP or B-SKIP/DOWN to adjust minute digit. 6. Press the MEMORY CLOCK-ADJ. button again, the correct time is shown on display. MEMORY/CLOCK-ADJ. LISTENING TO THE RADIO 1. Press the FUNCTION button and select Radio mode. 2.
COMPACT DISC PLAYBACK 1. Press the FUNCTION button and select CD mode. 2. Press OPEN/CLOSE button to open CD door. 3. Insert a disc with the label side facing up. 4 . Press OPEN/CLOSE button to close the CD door. For CD: Total number of tracks and time will be shown on the display. For MP3: Total number of folder and tracks will be shown on the display. For WMA: Total number of folder and tracks will be shown on the display.
REPEAT , REPEAT FOLDER AND MIX PLAYBACK Press PLAY MODE button during stop mode. CD plays with a single track repeat, all tracks repeat or randomly. FOR NORMAL COMPACT DISC PLAYBACK FOR MP3/WMA/USB PLAYBACK Mode sequence REPEAT >> REPEAT ALL Mode sequence REPEAT >> REPEAT FOLDER >> >> RANDOM >> REPEAT OFF. REPEAT ALL >> RANDOM >> REPEAT OFF.
ID 3 DISPLAY - Song name,Singer name and album name can be displayed cyclically by pressing ID3 button during playing MP3. Title-song name Artist-singer name Album-Album name Press ID3 again to cancel ID3 display. PROGRAM PLAYBACK FOR NORMAL COMPACT DISC PLAYBACK Programmed playback enables tracks on a disc to be played in the desired order. Up to 60 tracks can be programmed. 1. Press the “ MEMORY “ button. 2. Press the skip buttons to select the desired track number. 3.
MAINTENANCE CLEANING CD If the CD skips or will not play , the disc may need cleaning. Before playing, wipe the disc from the centre out with a cleaning cloth. After playing, store the disc in its case. CLEANING THE UNIT Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth. IMPORTANT NOTE If an abnormal display indication or an operating problem occurs, disconnect the AC power cord and remove the batteries.
