SCALE CARBON SCOTT 2014 BIKE OWNER’S MANUAL SCOTT SPORTS SA | 17 RTE DU CROCHET | 1762 GIVISIEZ | SWITZERLAND © 2013 SCOTT SPORTS SA, ALL RIGHTS RESERVED | SCOTT-SPORTS.COM DISTRIBUTION: SSG (EUROPE) DISTRIBUTION CENTER SA P.E.D ZONE C1, RUE DU KIELL 60 | 6790 AUBANGE | BELGIUM | V3.
content Scale Carbon Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 004 Geometry Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 005 Technical Data Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 006 BB Standards/ FD Mounting Details . . . . . . . . . . . . . . .
Scale Carbon Concept Geometry Scale Scale is the result of research and development based on the feedback of the ScottSwisspower Racing Team searching for one of the lightest cross country racing frames in the market. K Scott’s focus was not only on lightweight but also on a stiff and easy to handle racing frame.
technical data Scale Seatpost diameter 34.9mm Seattube clamp 38,2mm, some models with integrated seatclamp Headtube diameter 1 1/8” /1.5”, tapered, cups semi-integrated, 50-61mm cup OD Fork travel 100mm Fork length 471mm BB housing PF BB 92, PF BB 30 Rear Hub Width 135mm Max tire width 57.0mm/2,25” Chainring size Min. 22T, max. 45T BB Standards / FD Mounting Details Scale is available with 2 different Bottom Bracket systems. Both of them are designed for PressFit Cartridges (PF).
Headset Options On some Scale Carbon models you will find a chainguide system to support the shifting performance when using 2 chainring cranksets. Scale Carbon features a tapered headset and fork steerer system to match with semi-integrated headsets of the “50-61”mm range. 3 different mounting plates are available to match the different sizes of the outer chainrings (39/42/45T). The steerers of those forks are tapered from 1.5” to 1 1/8”.
BB Cable Guide / Cable Routing In case you want to replace the cables, please follow those steps: 1. Remove the clip-in BB Guide in the BB housing Scale Carbon features also an internal cable routing for front and rear derailleur. A special BB Cable Guide was developed for Scale Carbon which is available as a spare part at the Scott distribution. 2. Push the inner cables from the front downward inside the downtube to the BB housing. Please make sure to follow the cable routing as shown below: 3.
Seattube Clamp Replaceable Rear Derailleur Hanger Scale Carbon features two different versions of the seatpost fixation on the seattube. Scale Carbon is using the same replaceable rear derailleur hanger as Scott Spark and Genius. This spare part can be ordered via the Scott distribution with article number 206473. Integrated clamp type: This fixation shaves off approx. 15 grams in comparison to a regular seattube clamp.
Rear Disc Brake Mount The rear disc brake on Scale Carbon is Postmount (PM) Standard on the left chainstay and optimized for 160mm/6” rotors, so the calliper can be mounted directly without adapters on the Postmount fixation. For the set up of the front fork please use the fork specific manual attached to the bike. We recommend using front forks with distance of 471mm/18.54” between mid of axle to top of crown, as this will not influence the geometry and alter handling of the bike.
warranty warranty SCOTT bikes are made using the most innovative production and quality methods. They are equipped with best components of well known parts suppliers. Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Year. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
