Specifications

CD PLAY
Playing a CD
This CD player plays Audio CDs and MP3 CDs such as CDRs and CDRWs. Do not try
to play a Cdi, CDV or computer CD or DVD.
1 Slide the OPEN slider towards the right and the lid opens.
2 Insert an audio CD or MP3-CD, printed side up, by pressing gently on the CD
center so that it fits onto the hub. Close the lid by pressing it down on the left side.
3 Press the PLAY/PAUSE button for approximately 1 second to turn the set on and
the start playback. The current track number and the elapsed playing time are
displayed. It will take approx. 5 seconds for a CD to begin playback.
• You can interrupt playback by pressing the PLAY/PAUSE button.
The time where playback was interrupted flashes.
• Continue playback by pressing the PLAY/PAUSE button again.
4 Press the STOP button to stop playback.
The total number of tracks and the total playing time of the CD are displayed.
5 Press the STOP button again to turn off the set.
6 To remove the CD, hold it by its edge and press the hub gently while lifting the CD.
GB-7
CD PLAY
Playback information
• If a CD Rewritable (CD Recordable) is not recorded properly (finalized). “Disc
Error” is displayed.
• For CD Audio, use FINALIZE on your CD recorder to complete the recording.
• Playback will stop if you open the CD lid. The “Door-Open” indicator will appear in
LCD.
• While the CD is being read, “Now Reading” is displayed.
• If there is no activity for 10 seconds, the set will clear the display, If there is no
activity after another 50 seconds, the set will turn off automatically to save battery
power. Any settings such as program and playing modes will be kept.
Volume and
sound adjustment
• Adjust the volume level up to 32 steps by using the
electrical Volume up/down button.
Preset Equalizer
• While a CD is playing, press the PROG./ EQ/ ENTER button to cycle though the
EQ setting (FLAT, CLASSIC, POP, JAZZ AND ROCK).
FEATURES
Selecting a track and searching
Selecting a track during playback
• Briefly press +SKIP / SEARCH or -SKIP / SEARCH button once or several times
to skip to the current, previous or subsequent track start.
Playback continues with the selected track.
Selecting a track when playback is stopped
1 Briefly press +SKIP / SEARCH or -SKIP / SEARCH button once or several times.
The selected track number is displayed.
2 Press the PLAY / PAUSE button to start CD play. The playback starts with the
selected track.
Searching for a passage during playback
1. Press and hold +SKIP / SEARCH or -SKIP / SEARCH button to find a particular
passage in a backward or forward direction.
Search starts and playback continues at a low volume. After 2 seconds the search
speeds up.
2. Release the button when you reach the desired passage.
Normal playback continues from this position.
Note: During SCAN, searching is not possible.
GB-8